Model NO.: Biteman B-series heated, 1.5m3/min to 46.5m3/min
Modular Units Desiccant Chamber: Replaceable Factory Filled Desiccant Chamber
Pressure Dew Point: Minus 20 Centigrade Degree
Heat or Heatless: Heat
Trademark: BITEMAN
Transport Package: Wooden Case
Specification: ISO9000, ISO8573.2
Origin: Shenzhen China
BITEMAN Modular units heated desiccant air dryer
Unique features
-Less than 2% purge air with only 0.4kw to 4.4kw power consumption,no auxiliary motor
-Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
-Small desiccan chambers' group,each chamber unit is independent and detachable
-Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -20C (-4F) is ensured
-The lowest operation cost,user could recoup  dryer investment in three years by saving huge air and electricity
-1/3 size to traditional dryer
-The shortest downtime
-Using Molecular sieve as desiccant
Details of advantages
Innovative structure with patents,employs small desiccant chamber unit
1.Air flow equally and evenly pass through each desiccant chamber
2.Avoid channelling effect which more likely happens in traditional desiccant dryer
3.Small chamber allow no mandatory annul inspection
4.Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer
5.PLC controller ,Full function touch panel control
Structure and operation
Biteman dryer have two groups of desiccant chambers,A and B ,according to flow rate,A and B shift between adsorption and regeneration
Ease of replacement of desiccant chambers,it can't be more simpler comparing to exchange of desiccant,only one wrench it is done.Further more,needn't worry the desiccant density after refilling because it is filled in our factory to keep constant and stable pressure dew point,just like new dryer from factory
Technical data
B-series            Heatless       Â
(-40ºC dew point)
MODEL |
Port (inch) |
Flow rate (m³/min) |
Dimension (mm) |
@5~6bar |
@6~7bar |
@7~10bar |
L |
W |
H |
BTGMXW065-B |
G2 |
4.8 |
5.8 |
6.5 |
451 |
240 |
1628 |
BTGMXW085-B |
G2 |
6 |
7.4 |
8.5 |
560 |
240 |
1628 |
BTGMXW106-B |
G2 |
7.4 |
9.1 |
10.6 |
668 |
240 |
1628 |
BTGMXW146-B |
G2 |
9.8 |
12 |
14.6 |
885 |
240 |
1628 |
BTGMXW165-B |
G2 |
11.6 |
14.2 |
16.5 |
994 |
240 |
1628 |
BTGMXW206-B |
G3 |
14.6 |
17.8 |
20.6 |
763 |
480 |
1628 |
BTGMXW248-B |
G3 |
16.7 |
20.5 |
24.8 |
794 |
480 |
1628 |
BTGMXW295-B |
G3 |
21.5 |
26.3 |
29.5 |
903 |
480 |
1628 |
BTGMXW336-B |
G3 |
24.1 |
29.5 |
33.6 |
1012 |
480 |
1628 |
BTGMXW385-B |
G3 |
26.8 |
32.8 |
38.5 |
1121 |
480 |
1628 |
BTGMXW425-B |
G3 |
29.7 |
36.4 |
42.5 |
1230 |
480 |
1628 |
BTGMXW465-B |
G4 |
32.7 |
40.1 |
46.5 |
1339 |
480 |
1628 |
Marks Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC; Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC; Technical date:Pressure dew point≤-40ºC          Purge air≤5%          Pressure drop≤0.012MP          Noise≤75dB(average); Â
Â
B-series       Â
 Heat           Â
(-40ºC dew point)
MODEL |
Port (inch) |
Flow rate (m³/min) |
Dimension (mm) |
Max Power |
@5~6bar |
@6~7bar |
@7~10bar |
L |
W |
H |
Kw/1 Ph |
BTGMXD065-B |
G2 |
4.8 |
5.8 |
6.5 |
451 |
240 |
1628 |
0.8 |
BTGMXD085-B |
G2 |
6 |
7.4 |
8.5 |
560 |
240 |
1628 |
1 |
BTGMXD106-B |
G2 |
7.4 |
9.1 |
10.6 |
668 |
240 |
1628 |
1 |
BTGMXD146-B |
G2 |
9.8 |
12 |
14.6 |
885 |
240 |
1628 |
1.4 |
BTGMXD165-B |
G2 |
11.6 |
14.2 |
16.5 |
994 |
240 |
1628 |
1.6 |
BTGMXD206-B |
G3 |
14.6 |
17.8 |
20.6 |
763 |
480 |
1628 |
2 |
BTGMXD248-B |
G3 |
16.7 |
20.5 |
24.8 |
794 |
480 |
1628 |
2.4 |
BTGMXD295-B |
G3 |
21.5 |
26.3 |
29.5 |
903 |
480 |
1628 |
2.8 |
BTGMXD336-B |
G3 |
24.1 |
29.5 |
33.6 |
1012 |
480 |
1628 |
3.2 |
BTGMXD385-B |
G3 |
26.8 |
32.8 |
38.5 |
1121 |
480 |
1628 |
3.6 |
BTGMXD425-B |
G3 |
29.7 |
36.4 |
42.5 |
1230 |
480 |
1628 |
4 |
BTGMXD465-B |
G4 |
32.7 |
40.1 |
46.5 |
1339 |
480 |
1628 |
4.4 |
Marks Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC; Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC; Technical date:Pressure dew point≤-40ºC          Purge air: ≤2%          Pressure drop≤0.012MP          Noise≤75dB(average); Â
For more
Cnc MillingHow Does 5-axis CNC MILLING WORK?
Milling is the process of cutting and drilling material using a rotating cylindrical tool. This tool is held in a spindle and comes in a variety of sizes and forms. With 5-axis machining, there have two extra rotary axes defined by A, which rotates around the X axis, B, which rotates around the Y axis, and C, which rotates around the Z axis. The combination of additional axes depends on the machine and comes in variations, including AB, AC, or BC.
With 5-axis machining, the table or cutting tool can be tilted, creating the ability to avoid collision with the tool holder and allowing for better access to part geometry. This also ensures improved tool life and cycle time as it helps maintain cutting position and constant chip load. This type of machining offers a push toward single-setup machining, creating shorter lead times and increasing efficiency.
CNC milling is complex machining technique which utilizes several types of pre-programmed CAM and CNC controls to build customized components or parts. We are professional custom CNC milling company and 5 Axis CNC Milling Service provider in China, we offer the manufacturing of precision machined parts and solutions at affordable rates to meet the growing demands of the clients across the world.
Cnc Milling,Cnc Milling Machine,Desktop Cnc Mill,Small Cnc Mill
Ningbo Rongna Technology Co.,Ltd , https://www.service-machining.com