When the programmer of the boring and milling machining center prepares and designs a machining program, some problems will inevitably occur. If these problems are not discovered in time, they will affect the quality of the processing during processing, and sometimes have some serious consequences. Therefore, it is necessary to test the programmed procedures. The two-dimensional image shows the machining path of the tool in the plane of the fire or the plane of the sky. It is intuitive for the tool path that only processes one plane, and can clearly detect the tool path; the coordinate size in the image is compared with the size of the drawing and the program. Comparison makes it easy and quick to check if the dimensions are correct.

The three-dimensional image display is superior for machining a workpiece with multiple planes. It can display the correlation between the various planes, as well as the processing depth of each plane, and can observe the actual problem of whether the processing between the planes interferes, etc.; The tool path can be reflected from multiple angles and the programmer can verify the correctness of the program based on the tool path.

Trial Run Function A tested program is also required to be commissioned before it is officially processed. The trial run is to not clamp the workpiece, the spindle cutter is under the control of the program, and the empty cutter is trial run. This helps the programmer to find problems in the actual machining process, such as whether the tool is too large, whether it will affect the tool change, and whether it will affect the travel of each motion axis. After the above aspects, we can form a program that can process high quality and high precision. The detection of the MAHO boring and milling center is a typical method, and other types of machining centers can refer to the inspection. Thanks to the use of special spreaders, the jacket has small deformation, light weight, flexible driving and accurate positioning. This hot-packing scheme has been successful.

(Finish)

Temperature Sensor

Rtd Sensor,Ntc Thermistor,Temperature Monitor,Temperature Transmitter

ruian kenovi automotive electronic co ltd , https://www.kenovipower.com