Analysis of Failure Causes of Master Controller
Machining Steel is the use of CNC machining out,and the machining services including drilling, boring, cutting,meatl bending/metal bending, machining Steel Product material: carbon steel, 20#, 45#, A3, Q235,35Cr2MnMo and other series. In the high-speed machining out of the workpiece has a good finish. But machining Steel of the workpiece is easy to rust, so it will do heat treatment, surface nickel plating, chromium plating, surface black heat treatment, etc.. We have a special inspection department to carry out inspection, ensure the material aging hardness and each size to meet the requirements of the drawings, including the machining steel parts application in various industries: automotive, marine, communications, medical equipment, industrial automation equipment.Except them,we supply the sheet metal operations. Machining Steel, CNC Machining Steel, Machining Steel Parts, Metal Machining Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com
1) The flat cable is damaged due to the failure of the electrical equipment. When the electrical equipment is overloaded, short-circuited, or grounded, it may cause damage to the flat cable.
2) Natural damage. The use of the flat cable exceeds the service life, causes aging of the line, breaks down the insulation layer, and significantly reduces the mechanical strength, causing a short circuit, a disconnection, etc. between the flat cables and causing the flat cable to burn out. The main controller terminal is oxidized and deformed, resulting in poor contact and the like, which can cause electrical equipment to fail to work properly.
3) Human failure. When assembling or inspecting parts of the equipment, the metal object will crush the flat cable and cause the flat cable insulation to crack; the flat cable is in an improper position; the lead position of the electrical equipment is connected incorrectly; the flat cable lead is connected to the wrong position; when the repair circuit fails, Then, indiscriminately cut flat cables and wires.
The above mainly introduces the three types of failures of the master controller, electrical equipment failure, natural damage and human failure, which will lead to the master controller can not be used. If you want to buy controller equipment, our company has a wealth of resources and equipment in this area, may wish to understand! 