Automatic Welded Mesh Machines for Sale
Blister For Medical Packaging,Cosmetic Needle Blister Packaging,Cosmetic Water Light Needle Blister Box,Medical Anesthesia Component Blister Dong Guan Yi He Medical Packaging Technology Co.,Ltd , https://www.yhmedicalpack.com
Â
Our Advantage:
 1. We have more than 12 years of experience producing chain link machine. The machine can running very well.
2. You can use our machine directly once you get electricity. No need to connect wires or adjust the machine. Which can save your time and overseas service cost.
3. We use Servo Motor on the machine. As  result, the machine can running very fast and lso you can adjust many things through the PLC.
4. We using big and thick frame tube on the machine. Moveover, E-coating will be used as the machine surface finish. As a result, the machine produced by us is very strong and realy beautiful.Â
Â
Features:
1. This machine is designed as reinforced gantry structure with the advantage of high rigidity and stable running.
Â
2. The welding power is designed with medium frequency inverter power supply system with the features of electricity and energy saving.
Â
3. The machine is equipped with 6 sets of welding head and 6 sets of power supply systems. The welding current of each single point could be adjusted independently in order to ensure the reliability of welding spot.
Â
4. For the sake of increasing the output efficiency, it is designed as double-layer feeder for cycle running. When one feeder is under welding process, another feeder could be loaded with material.
Â
5. Automatic stepping welding. Servo motor will drive the stepping belt to ensure the accuracy of stepping position.
Â
6. Automatic demolding device: after welding the product, the demolding cylinder will jet up for preparation of automatic unloading.
Â
7. Automatic unloading device will grab the product via servo motor control. It will move down to grab the welded product and moving to the setting position via servo motor. It helps to reduce labor force and lower labor intensity. It is designed as 90° rotation of unloading feeder for the convenience of transportation of welded product. the demolding cylinder will jet up for preparation of automatic unloading.
Welcome you to contact us to get our machine photoes or videos.
Â
ECHNICAL PARAMETERS
Â
No.
Model
WL-SQ-MF90Kx6
1
Input Power
Three-phase
2
Rated Capacity
90KVAx6
3
Rated Input Current
300A
4
Rated Duty Cycle Rate
25%
5
Secondary Voltage Adjusting Grade
2
6
Max Secondary Floating Voltage
12.5V
7
Secondary Max Short Circuit Current
26KA
8
Continuous Working Current
20KA
9
Welding Transformer Insulation Grade
F
10
Welding Machine Pressuring Curves
2 types
11
Welding Programs Number
101 types
12
Welding Head
6 sets
14
Effective Welding Width
1000mm
15
Effective Welding Length
4000mm
16
Stepping Welding Moving Speed
500mm-1000mm/sec
17
Upper Electrode Stroke
80mm
18
Lower Electrode Stroke
50mm
19
Unloading Feeder Moving Distance
500mm
20
Unloading Feeder Lifting Distance
1200mm
21
Unloading Feeder Moving Speed
500mm-1000mm/sec
22
Unloading Feeder Rotating Angle
 900
Welcome to contact us for mor details.
Certification:ISO9001,CE,SGS.
Â