Breakthrough in my large-scale Titanium Chloride Technology
PVC Edge Banding For Furniture
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Furniture edge banding is a material for protecting, decorating and beautifying the section of furniture panels. It can make a piece of furniture show the overall effect of clear wood grain and colorful.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements. PVC Edge Banding For Furniture,Pvc Edge Banding For Furniture, Edge Banding For Furniture,Pvc Edge Banding Tape Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbpolymer.com
Chairman of the appraisal committee, director of the Titanium Dioxide Center of the National Chemical Industry Productivity Promotion Center and Secretary General of the Titanium Dioxide Industry Technical Innovation Strategic Alliance Bi Sheng said that the stable operation of the project indicates that China has mastered the international advanced titanium chloride production technology. , will play a positive role in the domestic titanium dioxide company. The project research has improved the level of technical equipment and product quality in China's titanium dioxide industry, and has significant implications for the structural reform of the supply side of the domestic titanium dioxide industry, the upgrading of technologies and products, energy conservation and environmental protection, and has broad application prospects. .
It is understood that the chlorination process has become the mainstream production process for the international titanium dioxide industry due to its short process flow, large production capacity, high product quality, and low pollution emissions, accounting for 63% to 65% of the total global production capacity (excluding China). But for a long time, the international chemical giant has a high monopoly on the chlorination of titanium dioxide production technology, the use of advanced chlorination process to replace the sulfuric acid process has become the voice of all parties, has also become the main direction of domestic titanium dioxide industry transformation and upgrading.
According to reports, the project uses boiling chlorination + gas phase oxidation process technology, developed boiling chlorination technology, titanium tetrachloride refining technology, gas phase oxidation technology, oxidation reactors and rock salt removal technology, reasonable process selection, advanced technology, a total of Obtained 16 technical patents, with domestic independent intellectual property rights.
The products of the project have been tested and verified by national paint quality supervision and inspection centers, Zhenjiang Fanhua Detection Technology Co., Ltd. and other national testing institutions such as CMA titanium dioxide application testing third-party laboratories, peer manufacturers, and some customers such as coatings, plastics, and papermaking. The quality level is superior to that of the domestic industry. The major basic quality indicators and the main application performance in water-based and solvent-based coatings and PVC plastics have reached or even partially surpassed the quality standards of world-class products. In particular, the quality indicators such as product dispersibility, hiding power, and whiteness completely meet or slightly exceed those of internationally renowned brand products, and the quality level is very stable.
In addition, the products of various harmful elemental components such as cadmium, lead, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers have met the limits of the EU RoHS directive. It can completely replace imported high-end products in general-purpose applications.
Li Maoen, chairman of Luohe Xingmao Titanium Industry Co., Ltd., said that the company's next step will continue to increase investment in core technology R&D. The United Nations research institutes will tackle the 100,000 tons/year chlorination Titanium Dioxide new technology and new equipment to achieve domestic chlorination as soon as possible. The breakthrough in large-capacity titanium dioxide production equipment technology has improved the level of national industry.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.