Brief Discussion on Safety and Explosion-proof Knowledge of Thermal Oil Heater (Oil Heater)

     The thermal oil furnace is a special boiler used to heat and process crude oil and other mineral oils. The thermal oil furnace preheats the crude oil and even applies it to a certain link in the production of lubricating oil. ( Pressure Vessels , Storage Tanks ) Compared with other conventional heating boilers, the heat-conducting oil furnace is characterized by uniform heat, convenient operation, and energy saving and environmental protection, so the heat-conducting oil furnace is favored by industrial manufacturers.    

The thermal oil furnace is a kind of low-pressure boiler, but its internal thermal liquid is very hot, and most of the liquid is inflammable and explosive. If the thermal fluid leaks during the operation of the thermal oil furnace, it will cause fire and even explosion. It is extremely dangerous and it is very dangerous. Therefore, the safety of the thermal oil furnace operation is very worthy of attention. Due to its high temperature (320 ℃), low voltage (0.3 - is 0.5MPa) advantage, the heating temperature can be precisely controlled, it can replace the original steam boiler heating. Thermal oil heating furnace temperature up to 350 °C, molten salt furnace heating temperature up to 530 °C. Protecting water resources: As a heating medium for steam boilers, it is easy to freeze in the poor areas of cold regions. As the burning of fuel ash in gas-fired thermal oil furnaces cannot be produced, this is not a proactive measure for oil and gas in thermal oil furnaces. If the mixture of gas and air injected into the furnace is injected within a certain range or easily explode. Another thermal conductivity oil-conducting furnace has a thermal conductivity of more than 400 °C. The molten salt heat has advantages over the transfer price and service life of the heat transfer oil, but other aspects are at a significant disadvantage, especially in the system operation. The complexity aspects. The pipe arrangement does not have about 5 % energy saving compared to the gas socket, no water structure and installation of similar equipment, compared to the top coil . The resistance, speed and pressure are stable to use, safe and durable. Automated control system for combustion of oil-gas gas-conducting oil furnaces. The oil-conducting oil furnace is a compact, oil-filled, compact body whose air, water supply, control and auxiliary equipment for heat-conducting oil furnaces are installed in the chassis, medium-sized and large-scale factories and can also be assembled.

Although the advantages of the thermal oil furnace are many, but if you do not pay attention to safety problems in use, it is also a very dangerous boiler. It is recommended that refineries put safety issues in place during the use of a thermal oil furnace.