HYDAC filter replacement

Product introduction

1, can be directly installed on the top, side or bottom of the tank, the filter head is exposed outside the tank, the cylinder part is immersed in the tank, thus simplifying the system pipeline, so that the system layout is more compact.

2, equipped with magnets, can filter the oil more than 1 micron ferromagnetic particles,

3, with bypass valve: when the cold oil starts, due to the system liquid temperature is too low, flow pulsation and other factors caused by the filter pressure difference is too large host can not work, and the filter element is blocked by pollutants, the parallel bypass valve at the lower part of the filter cover will automatically open,( 2015733,opening pressure difference is 0.4MPa) to protect the filter element and the system work normally.

4, with a check valve: the filter is placed on the side and bottom of the tank, when replacing the filter, the oil in the tank will not flow out.

5. The flow diffuser is provided. The flow diffuser composed of the lower part of the simplified part can make the return oil flow into the tank smoothly, which is not easy to produce bubbles, reduce the re-entering air, weaken the commotion of deposited pollutants, and can play a coarse filtering role when the bypass valve is opened.