When the dump truck is unloading cargo, it may be because when the unloaded area is tilted because of the tilted cargo, because some cargo gaps are relatively large, there is a space that can be compressed. In the case of a heavy dump truck , due to the relatively large pressure of the unit's area, it will cause a local subsidence, resulting in the contact position between the driving wheel and the ground on both sides of the vehicle. Tilted situation. The dumping of dump trucks will also occur. So what are the common side-tripping reasons?

1. The dump truck is unloading the ground, because the slope of the ground will be larger and not flat and will produce sideways. When the dump truck is loading and unloading cargo, the selected ground should be quite steep and relatively flat. If the leveling situation is poor, it will also lead to accidents.

2. The loading and unloading location of dump trucks cannot be chosen on those softer floors.

3. When the dump truck is properly loaded and unloaded, it is necessary to strictly observe the safety operation rules of the vehicle. After the vehicle is in the parking brake, the cargo can be loaded and unloaded. If the location of loading and unloading is chosen on an uneven road, because the carriage is also in an elevated state. It will cause the goods to slide off and cause the dump truck to roll. Because on this uneven road, the addition of a carriage or lift will cause the upper part of the vehicle to sway. Rollover accident.

4. When the dump truck is carrying out loading and unloading operations, because the light is darker in the dark, or the surrounding environment is not in very good condition, and the driving does not observe the loading and unloading conditions, it may be The accidental rollover accident was caused by the improper location of the truck.

Aluminum Fireproof Panel

Aluminum Fireproof Panel is a kind of Aluminum Composite Panel.It has fireproof character and apart from it,it also have many other advantages.Such as 1. Light weight: aluminum plastic plate is composed of aluminum and plastic core material with low density. Therefore, compared with aluminum (or other metals) with the same rigidity or thickness, its quality is smaller, and its quality is much smaller than that of glass and stone.
2. Good rigidity: the aluminum-plastic plate skillfully uses the mechanical principle of I-beam structure and endows it with unique mechanical properties. In addition, the aluminum-plastic plate is compounded under high-temperature conditions, and in the whole processing process, the two-layer Aluminum Plate is in a certain tension state
3. Rich color and strong decoration: the layer surface of aluminum-plastic plate can be made into various colors, and the pattern design matching for all purposes can be carried out

Pe Aluminum Composite Panel,Pvdf Aluminum Composite Panel,Acp Aluminum Composite Panel,Fireproof Aluminum Composite Panel

Trumony Aluminum Limited , https://www.szaluminumtube.com