Complete Particle Board Making Machine for Furniture
November 13 08:09:34, 2022
Model NO.: PB
Max. Size of Log: 230mm
Chip Size: 30mm
Size: 1800*1900*1210mm
Color: Customized
Customized: Yes
Trademark: RF
Transport Package: Wooden Box Package
Specification: 3200*1800*2000mm
Origin: China
HS Code: 8477409000
Model NO.: PB
Max. Size of Log: 230mm
Chip Size: 30mm
Size: 1800*1900*1210mm
Color: Customized
Customized: Yes
Trademark: RF
Transport Package: Wooden Box Package
Specification: 3200*1800*2000mm
Origin: China
HS Code: 8477409000
Particle Board Production Line Â
^ Product Application 1. Particle board plant is to use footpaths timber, branch wood, bagasse, bamboo, wood processing waste, sawdust and other wood as raw material, Urea-formaldehyde resin adhesive imposed after mixing, through HP repression into density at 680-800kg/cubic meters of man-made sheet. 2. Face plate for the graded structure, smooth surface, good processing performance, widely used for furniture, construction, packaging, vehicles and ship's interior decoration. 3. As particle board with abundant sources of raw materials, product wide range of uses, noise effects and anti-borers, good performance advantages. Therefor the product has broad market prospects. 4. Our factory has successfully developed the particle board production line with an annual capacity of 10000-100000 cubic meters. Equipped with PLC control system with man-machine interface of famous foreign brand names, the production line is easy to operate, stable to run, which makes production cost greatly reduced. With small investment in fixed assets, it is the optimum choice for the manufacturers of particle board. Â
Â
  ^ Main Feature
1.
CNC Control , servo motor
2.
Automatic working
3.
High efficientÂ
^ Key Steps
1.Chip preparation section Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake bin.
2. Drying and sifting section The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.
3. Glue regulating and applying section After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue mixers respectively.
4. Forming and pre-pressing section The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press.
5. Hot pressing The base board will be push to the hot press by the automatical loader. after some certain time hot press, the board will be formed and get a solid quality. after hot pressed , the board will be unload to cooler automatically.
6.Cooling and trimming section The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lifter.
Â
7. Cutting Section The board after trimming, then will be transfer to the cutting machine to repaire the size
Â
8. Sanding Section The board after cutting, then will be transfer to the sanding section. the board will be sanded three times, then will be stacked and classfied.
Â
^ Company We are  the leading manufacturer in woodworking industry in Linyi City, China. Our main products are plywood line and particle board line, and there are also factories for plywood, particle board and MDF producing.
Customers cover most of the world, from Vietnam, Indonesia, India, Iran, Dubai, Nigeria, Algeria, South Africa, Garner, Brazil, American and Russia.
^ Our Service 1.We will send our engineer under your indications to  your  factory  for  installing,  debugging  and  maintaining,  you only need to afford the cost of the flights, and  the engineer's accommodation .
2.After the warranty, we can also supply the engineer service and the technical service, but  you need to  pay  the salary for the engineer! and afford the cost of the replaced aparts yourself.Â
Trust us! Once cooperative, long-term friend! All we "Ruifeng Men" welcome your visit!
Â
Â
Daisy Chen Tel:+86 18669617489 Â
Â
Â
Â
Particle Board Production Line Â
^ Product Application 1. Particle board plant is to use footpaths timber, branch wood, bagasse, bamboo, wood processing waste, sawdust and other wood as raw material, Urea-formaldehyde resin adhesive imposed after mixing, through HP repression into density at 680-800kg/cubic meters of man-made sheet. 2. Face plate for the graded structure, smooth surface, good processing performance, widely used for furniture, construction, packaging, vehicles and ship's interior decoration. 3. As particle board with abundant sources of raw materials, product wide range of uses, noise effects and anti-borers, good performance advantages. Therefor the product has broad market prospects. 4. Our factory has successfully developed the particle board production line with an annual capacity of 10000-100000 cubic meters. Equipped with PLC control system with man-machine interface of famous foreign brand names, the production line is easy to operate, stable to run, which makes production cost greatly reduced. With small investment in fixed assets, it is the optimum choice for the manufacturers of particle board. Â
Â
  ^ Main Feature
1.
CNC Control , servo motor
2.
Automatic working
3.
High efficientÂ
^ Key Steps
1.Chip preparation section Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake bin.
2. Drying and sifting section The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.
3. Glue regulating and applying section After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue mixers respectively.
4. Forming and pre-pressing section The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press.
5. Hot pressing The base board will be push to the hot press by the automatical loader. after some certain time hot press, the board will be formed and get a solid quality. after hot pressed , the board will be unload to cooler automatically.
6.Cooling and trimming section The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lifter.
Â
7. Cutting Section The board after trimming, then will be transfer to the cutting machine to repaire the size
Â
8. Sanding Section The board after cutting, then will be transfer to the sanding section. the board will be sanded three times, then will be stacked and classfied.
Â
^ Company We are  the leading manufacturer in woodworking industry in Linyi City, China. Our main products are plywood line and particle board line, and there are also factories for plywood, particle board and MDF producing.
Customers cover most of the world, from Vietnam, Indonesia, India, Iran, Dubai, Nigeria, Algeria, South Africa, Garner, Brazil, American and Russia.
^ Our Service 1.We will send our engineer under your indications to  your  factory  for  installing,  debugging  and  maintaining,  you only need to afford the cost of the flights, and  the engineer's accommodation .
2.After the warranty, we can also supply the engineer service and the technical service, but  you need to  pay  the salary for the engineer! and afford the cost of the replaced aparts yourself.Â
Trust us! Once cooperative, long-term friend! All we "Ruifeng Men" welcome your visit!
