Product Description:


High Quality Stainless Steel wire weaved hoses used for Faucet, Water Heater and Kitchen

Outer tube:stainless steel wire or aluminium wire,surfacing is nickel plated or chrome plated

Inner tube:EPDM,Rubber

Fittings:brass nut and insert core

Inner tube diameter:8mm-18mm

Working pressure:20bar

Working temperature:0-100C

Screw thread:NPT,BSP

Nut size: F1/2"×F1/2"

OEM is available.

Usable range:can link with the basin,toilet,kitchen,sanitary and so on.
 

Our certifications:





FAQ

 Q: Are you trading company or manufacturer ?

  A: We are manufactuer.

  Q: How long is your delivery time?

  A: Usually within 7 to 30 days days

  Q: Do you provide samples ? is it free ?

  A: Yes, we would be very glad to provide samples free of charge based on fewer quantity.

  Q: What is your terms of payment ?

  A: For Payment less than 5000USD, 100% in advance.  When Payment is over 5000USD,

   30% T/T as  deposit , and the balance be paid against B/L copy.

  Q: How can I see your samples?

  A: We attend Kitchen & Bath China every year, if we could not meet in the fair,

  the samples could be sent via DHL, FEDEX, UPS.

 For more info, please feel free to contact us!

 

For KATO Cylinder Seal Kit

The replacement process of excavator hydraulic cylinder is as follows:
1. Turn off the hydraulic system: Before replacing the hydraulic cylinder, it is necessary to turn off the system to avoid liquid leakage in the hydraulic system.
2. Disassembling the hydraulic cylinder: Disassembling the hydraulic cylinder requires the use of tools such as wrenches, screwdrivers, etc. Firstly, the hydraulic pipeline needs to be removed, and then the bolts of the hydraulic cylinder need to be removed to remove the hydraulic cylinder from the machine.
3. Check the hydraulic cylinder: Check if there is any damage to the hydraulic cylinder, and if there is any damage, replace it.
4. Install a new hydraulic cylinder: Install the new hydraulic cylinder onto the machine and secure the cylinder with bolts.
5. Connect hydraulic pipeline: Connect the hydraulic pipeline to the hydraulic cylinder, pay attention to the position and direction of the connection, and ensure that the connection is secure.
6. Test system: after replacing the hydraulic cylinder, it is necessary to test whether the system operates normally, check whether the hydraulic cylinder operates normally, and deal with any problem in time.
7. Cleaning work: Clean the liquid and debris in the hydraulic system to ensure that the system is clean and avoid any impact on the system.

For Kato Cylinder Seal Kit,For Kato Center Joint Seal Kit,Center Joint Seal Kit,Repair Kit For Kato Joystick

Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com