Electric sightseeing car
Suzhou Lange closed electric sightseeing car Electric sightseeing car Qingdao Yiang Electric Tourist Car Suzhou Lange Electric Vehicle 11 electric sightseeing vehicles 4 electric sightseeing cars Sightseeing tour bus 11
Auto Parts are components of an automotive, and serve for automotive.
As the machining market competition of automotive parts increased fiercely , the concept of environmental protection, and continuously upgrade on the technology, these years, the auto parts are being procured world widely.
In terms of the application, auto parts can be divided into engine system, running system, steering system, braking system, and body accessories.
In daily life, in automotive industry, we can easily find auto parts, such as Piston, connecting rod, crankshaft, crankshaft, piston ring, flywheel, pressure plate, clutch, gearbox, variable speed shift operating mechanism, transmission shaft, universal joint, the wheel hub etc.
Auto Parts,Auto Spare Parts,Aluminum Die Casting Auto Parts,High Precision Auto Parts,Malaysia Casting Transmission Parts NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.aldiecastings.com
Characteristics The American original batteries used in these series of electric sightseeing vehicles have features such as large capacity, light weight, long life, fast charging, high safety, and high efficiency. The car has a beautiful appearance design, large space practicality, and convenient operation. Popular tourist attractions. The vehicle adopts German technology, import configuration, bearing noble life, energy saving and environmental protection.
Use 1, golf course; 2, park area; 3, amusement park; 4, real estate; 5, resort; 6, airport; 7, campus; 8, police and comprehensive management patrol; 9, factory factory; 10, other places.
The basic composition of the electric sightseeing car consists of three major components: Electrical system, chassis, body
Drive mode The electric sightseeing car adopts a battery-powered driving mode. It does not emit harmful gases that pollute the atmosphere. It can be used only by charging the battery. Most of the power plants are built far away from densely populated cities, causing less harm to humans and the power plant is not fixed. Moving, centralized emissions, and removal of various harmful emissions are relatively easy, and related technologies have also been developed. Tourist car battery power and energy to get way, such as coal, nuclear energy, hydraulic and so on. Electric sightseeing vehicles can make full use of surplus electric power when electricity is used in the evening to make full use of power generation equipment day and night, greatly improving its economic benefits, and contributing to saving energy and reducing carbon dioxide emissions.
The charger and maintenance must first determine the brand of your electric sightseeing car. Under normal circumstances, the charger is not universal. It is not the charger of the same brand model used by each other. It is easy to cause overcharge or insufficient charging, and there is a great deal of protection for the battery. The impact of the proposed use of the original charger.
Electric Sightseeing Vehicles The ownership of electric vehicles in China is now somewhat confusing. In fact, think carefully: "Motorized" cars, as long as the machine is powered, whether it is gasoline engine, diesel engine, steam engine or electric motor, should belong to the motor vehicle. As for the battery tourist vehicle, it is not allowed to drive on the road because the design speed of the battery car is relatively low, and it is a license plate for special vehicles that can only be driven within the prescribed area. There is also an electric power-assisted bicycle, which is even more confusing. Obviously, it is stipulated that the speed should not exceed 20 kilometers per hour. In fact, it can catch up with the motor. It is obviously driven by a motor. The two are not bicycles.
Maintenance 1. No loss of electricity when stored The electric sightseeing car battery must not be in a lossy state when it is stored. Loss of power status means that the electric sightseeing car has not been charged in time after use. When the battery is stored in a depletion state, sulfation is likely to occur. The crystal of lead sulfate adheres to the electrode plate, blocking the ion channel, causing insufficient charging and decreasing the battery capacity. The longer the idle state is idle, the heavier the damage to the battery. Therefore, when the sightseeing car is idle, it should be recharged once a month, so that it can keep the battery down. 2, regular inspection During use, if the mileage of the tour bus suddenly drops sharply in a short period of time, it is likely that there is a problem with at least one battery in the battery pack. At this point, the sales center or the agent maintenance department should promptly check, repair or match the group. This can relatively extend the life of the battery pack and save you the most money. 3, to avoid large current discharge Electric scooters should avoid slamming and accelerating as they start, carry people, and go uphill, creating an instantaneous high-current discharge. The large current discharge easily leads to the production of lead sulfate crystals, thereby impairing the physical properties of the battery plates. 4, correctly grasp the charging time In the process of use, the charging time should be accurately grasped according to the actual situation, and the frequency of charging should be determined with reference to the frequency of use and the mileage of the vehicle. Charging after a short period of time after full charge, charging time should not be too long, otherwise it will form an overcharge, so that the battery heat. Overcharging, overdischarging, and undercharging can shorten battery life. 5, to prevent exposure Electric sightseeing vehicles are strictly prohibited from sun exposure. An excessively high temperature environment will increase the internal pressure of the battery and cause the battery to lose water, causing the battery activity to decrease, and accelerating the aging of the plate. 6, to avoid charging the plug when charging 220V power plug or charger output plug loose, contact surface oxidation and other phenomena will cause the plug to heat, too long heating time will cause the plug to short circuit or poor contact, damage the charger and battery, bring you unnecessary losses. Therefore, when the above conditions are found, oxides should be removed or connectors replaced. 7, often check the tire pressure Keep the tire pressure at the correct tire pressure; the tire pressure must be checked every two weeks or at least monthly; Incorrect tire pressure will result in power consumption, short mileage, reduced driving comfort, reduced tire life and reduced driving safety; 8, other important attention items 1) Check whether the power is sufficient before the vehicle is out daily, whether the braking performance is good, whether the screws are loose, etc. If there is a fault, repair should be promptly carried out. Check that it is determined that there is no fault before the vehicle can be taken out; 2) Charging should be carried out in places that children cannot reach; 3) Each time the vehicle is parked, the power switch must be turned off, pull out the key, pull the gear switch to the neutral position, and pull the handbrake up; 4), repair or replace the battery, electrical, must be turned off after the power switch; 5) When children play in the car, they must remove the key switch to avoid danger; 6) Before the electric car travels, check whether the car door is closed; 7) The main power switch should be turned off immediately due to accident or other reasons. Electric sightseeing car battery maintenance 1, always check the pole and the connection head is reliable. In order to prevent oxidation of the terminals, protective agents such as Vaseline can be applied. 2, the battery should be covered with the pores should be smooth. When the battery is charged, a large amount of air bubbles will be generated. If the vent hole is blocked, the gas cannot escape. When the pressure increases to a certain extent, the battery case will burst. 3, can not be directly fire (short circuit test) method Check the battery power This will cause damage to the battery. 4. Check the internal electrolyte level of the battery. If the electrolyte is found to be too low, add distilled water or special lead-acid battery supplement fluid. Never use pure drinking water instead. 5, when the electric car is in use, it is necessary to lightly step on the accelerator pedal, otherwise the instantaneous large current discharge will damage the battery. 6. After using the electric vehicle for a short distance, it is recommended that you fully charge the battery in time so that the battery can always maintain its saturation state and the service life of the battery can be maintained. [1]
Electric Sightseeing Vehicle Procedures 1. Apply to the transportation department to apply for operating qualifications; Second, to the business sector registration company; Third, to the traffic police department to apply for a special number plate in the plant area; or can cooperate with the development zone management association; it may be much smoother for them to apply.
Note when buying the most important after-sales 1 After-sales is timely (generally manufacturers promise 24 hours, but it is estimated that there are few domestic can do) 2 After-sales costs, after the warranty period is basically slaughtered. (usually one-year warranty, but buyers can actually get 2 years, a large amount can take 3 years and require a resident technician) 3 Price and product specifications. 4 product reputation, and manufacturers strength.
Electric vehicle battery life The price of an electric car battery should be the same as that of an electric sightseeing car. Currently, electric cars generally have around 12 batteries. The market price of a piece is about 1000. If the battery is used properly, it can be used normally. In 3-5 years, the actual situation will be subject to actual
Related information The rated occupant is several seats, dimensions (length * width * height) (mm), / what is the driving range, how many kilograms full load, the maximum speed is the maximum climbing degree (full load), the minimum turning radius Whether the motor is imported or domestic, the battery is imported or domestic, the electronic control is imported or domestic, the charger is not a computer controlled intelligent charger Of course, after-sales service and brands are very important reference! Electric sightseeing car before operation and daily safety inspection · General: All parts should be in the correct position and properly installed. Make sure to tighten all nuts, bolts, and screws. • Safety signs and information boards: Check that all safety signs and information signs are in place. Tires: Check the correct pressure. Visually inspect for wear, damage and proper inflation every day. • Battery: Check the electrolyte to ensure the correct level. Check the battery terminal. Leads should be tightened and not corroded. • Charger cords, plugs, and sockets: Visually inspect for cracks, loose connections, and lead wear. Performance check • Forward/reverse control: Check that the operation is correct. Brakes: Make sure the brakes are functioning correctly. When fully depressing the brake pedal with proper pressure, the vehicle should stop smoothly and linearly. Parking brake: When locked, the parking brake should lock the wheels and keep the vehicle stationary. It should be released when the accelerator pedal is depressed. • Reverse buzzer: When the current forward/reverse switch is set to the R "back" position, the reverse buzzer should sound as a warning. · Steering: The vehicle should be easy to steer and there should be no movement in the steering wheel. Lead-acid battery maintenance 1, battery water A. Routine: once a month (20 times per month) High frequency of use: old batteries ~ once or twice a week B. After charging is complete, add water to the bottom of the sink indicator. C. When adding water, add distilled or deionized water. 2. Zhonghe A, directly splash soda or aqueous solution to the battery (sodium bicarbonate: NaHCO3) and then rinse the electrolyte with tap water B. Spray the battery cleaner and protective agent onto the battery head. When the water is overfilled, the electrolyte splashes onto the battery body during charging, and neutralization prevents corrosion of the battery head and structure. The battery head should be well protected to ensure good battery connection and reduce the connection resistance to maintain the battery performance. formula Sodium Bicarbonate: JPY900/500g Battery Head Cleaner {Water Solution} Battery Head Protectant 200g of sodium bicarbonate
Electric Sightseeing Vehicle Motor Sound Big First: The sensor working environment is poor, resulting in system failure! Need to set photoelectric or magnetic sensors in non-heat source area for detecting motors Rotate the position and send a signal to control the commutation.
Use and maintenance of the charger 1. The AC power outlet of the electric sightseeing bus must be matched with the AC power plug of the charger. 2. The AC voltage should be stable and the change should not exceed 220 ± 10%. 3, charging operation program: disconnect the electric lock switch on the vehicle, the charger output DC plug into the battery plug, and then the charger AC input Insert the plug into an AC outlet. 4, before using the charger, please read the charger manual carefully.
Tips for purchasing an electric sightseeing car 1: At the time of purchase of an electric sightseeing bus [2], not only should its appearance be emphasized, its battery carrying capacity must also be deeply understood. Only batteries with large capacity, long life, and high safety can ensure the sightseeing car. Smooth work. 2: See if the tires are safe, only have enough power, and the tire gas is saturated, then we can rest assured that we can do it. 3: When there is a need to purchase an electric sightseeing car, you can go to a professional company to consult. The best company for research, design, and sales is the company. Only large-scale companies can send us high-quality products and excellent after-sales services. 4: Before buying, you must ask the other party about the post-sale protection work, such as: whether the after-sale is timely, generally one year warranty, but the buyer can actually win for 2 years, the large amount can take 3 years and requires a resident technician.