Four points after the installation of wooden doors
Suspended platform, as temporary suspended cradle platform, are
widely applied in maintenance applications such as curtain fecade
cleaning in high rise building, painting, glazing repairs, bill- board
painting, cable installation and other outer working of high rise
building up to 150 meters about 30 floors high. Our ZLP series suspended
platform cradle, ZLP1000, ZLP800, ZLP630, ZLP500, ZLP400 and ZLP150, are
good choices for fulfill above outside of wall work. Based on the different materials, the suspended platform could be divided into Aluminum Working Platform, steel Working Platform, galvanized Working Platform.
ZLP series temporarily installed suspended platform is an ideal access equipment for building facade construction, decoration, cleaning and maintenance. It can be also applied to other aerial working such as elevator installing, ship building, construction of dam, bridge, large chimney, etc.
This equipment is easy to operate, convenient to move and reliable in safety and much more efficient than traditional scaffolding.
Suspended Working Platform,Suspended Cradle Platform,Aluminum Working Platform,Suspended Construction Platform,Working Platform Cradle SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com
After the installation of wooden doors, there are the following points:
1. When clearing the stain on the surface of the wooden door, use a soft cotton cloth to wipe the surface of the product with a hard cloth. When the stain is too heavy, you can use a neutral detergent, toothpaste, or household-specific cleaning agent to remove the stain, wipe it dry, and avoid flushing with clean water.
2. Pay attention to dipping the neutral agent or water rag, do not put it on the surface of the solid wood door for a long time, otherwise it will harm the surface, so that the surface finish material discoloration or peeling.
3, hinges, locks are active accessories, should be immediately tightened when the loose occurs, the location of the hinge should be timely oil injection, if the lock is not flexible, you can insert a proper amount of pencil core powder into the key hole, not accidentally oil. When using wooden door products, the relative humidity of the indoor air should be kept as much as 60%-75%. During the period of geothermal heating, when the wooden door that is not installed is stored, it must be stored directly in the ground baking place. Due to the characteristics of wood drying and shrinking, in the case of large differences in temperature and humidity, such as a slight cracking or shrinkage is a normal phenomenon, do not panic, this phenomenon will disappear naturally with the seasonal changes. In order to maintain the bright color of solid wood doors, it should be regularly waxed for maintenance.
4. The artificial wooden door is made of wood fiberboard. Relatively speaking, the coefficient of deformation is very small. As long as the joint is tightly fitted, the dimensions are regular, and the installation is fine, there will not be obvious changes afterwards, but its environmental protection is not as good as solid wood doors.