G9180 180hp SDLG Motor Grader Middle Size VOLVO Technology
SDLG G9180 MOTOR GRADERÂ SPECIFICATIONS
OVERALL DIMENSION
Dimension
8975x2710x3240mm
Min ground clearance of front axle
610mm
Ground clearance of rear axle
430mm
Wheel tread
2260mm
Wheelbase
6480mm
Center distance of balance box
1538mm
OVERALL PARAMETER
Overall working weight
15300kg
Max inclination angle of front wheel
±18°
Max swinging angle of front axle
±16°
Max steering angle of front wheel
±50°
Steering angle of articulated frame
±23°
Cutter diameter
1626mm
Cutter size(length*height*thickness)
3962x635x25mm
Swing angle of blade
360°
Min turning radius
7.6m
Lift height of blade
445mm
Cutting depth of blade
787mm
Blade cutting angle
Forward 47°/backward 5°
Blade side shift
Left 673mm / right 673mm
Max tractive force
78kN
Max speed ( forward/reverse )
38/23.6 km/h
--
--
ENGINE
MODEL
WP6G190E22
Type
Inline, water cooled,dry cylinder liner,direct injection
Rated power/speed
140kW/2200r/min
Engine displacement
6750ml
Cylinder bore/stroke
105/130mm
Min fuel consume ratio
210g/Kw.h
Max torque
760Nm
Emission standard
Euro2
TRANSMISSION SYSTEM
Transmission type
Fixedshaft power shift
Torque converter
Single stage single phase three element
Gears
Six forward three reverse
Speed at forward gear I
0-5km/h
Speed at forward gear II
0-9km/h
Speed at forward gear III
0-11.5km/h
Speed at forward gear IV
0-19.5km/h
Speed at forward gear V
0-23.6km/h
Speed at forward gear VI
0-38km/h
Speed at reverse gear I
0-5km/h
Speed at reverse gear II
0-11.5km/h
Speed at reverse gear III
0-23.6km/h
HYDRAULIC SYSTEM
Type
Open-type system
System pressure
21Mpa
FILL CAPACITY
Fuel
270L
Hydraulic oil
132L
Options
Front blade
Equipped
Rear ripper
Equipped
2>Description:Â As a product of high speed, high efficiency, high accuracy and multiple purposes, G9180 is developed by SDLG on the basis of advanced technology of European, can be used for ground leveling and grooving, scraping slope, bulldozing, ploughing snow, loosening, compacting, material arrangement and mixing works, and is widely applied in construction operating condition of road, airport, defence engineering, mine construction, road construction, water conservancy construction and farmland improvement and so on.
3>Advantage:Â
The perfect combination of Weichai engine and advance 6WG180 gearbox helps realize best capability and fuel efficiency. This product adopts high pressure gear pump and imported multi-way valve and double pump and two circuit hydraulic system, and the system pressure of whole machine can reach 21Mpa (competitors are only 18Mpa), thus improving the operating efficiency.
It is applied with European advanced technology and equipped with the dual cylinder-driven pallet-type working device, helping to realize large driving force and high reliability. The cable can rotate with load and provide precise operation which is domestic industrial originated.
Swing frame is made of lubrication-free and maintenance-free composite bearing, with small frictional coefficient, high reliability and is shock-proof and water-proof, hydraulic lock cylinder location is adopted and is easy to operate.
This standard cab is fully sealed and safe and reliable, With wide visual field, operators can see the front wheel and the blade clearly thus to improve the operating precision.
Electrical system of the entire machine has centralized control, three-stage alarm electronic monitoring system, digitalized stepping instrument display, high man-machine interaction and is convenient for detection and maintenance.
Front wheel can tilt 18 degree which reduce the turning radius and improve operating flexibility of whole machine, when working on a slope, the front wheel will tilt to increase adhesion and improve stability for the whole machine. In addition, the tilting front wheel will offset side force from materials to the blade and prevent front wheel from sideslip.
4> Reference Photos: 5> Grader Options:
6> SDLG Production Map:
7> SDLG Factory:
Â
1> Specifications Â
G9180 180hp SDLG Motor Grader Middle Size VOLVO Technology
SDLG G9180 MOTOR GRADERÂ SPECIFICATIONS
OVERALL DIMENSION
Dimension
8975x2710x3240mm
Min ground clearance of front axle
610mm
Ground clearance of rear axle
430mm
Wheel tread
2260mm
Wheelbase
6480mm
Center distance of balance box
1538mm
OVERALL PARAMETER
Overall working weight
15300kg
Max inclination angle of front wheel
±18°
Max swinging angle of front axle
±16°
Max steering angle of front wheel
±50°
Steering angle of articulated frame
±23°
Cutter diameter
1626mm
Cutter size(length*height*thickness)
3962x635x25mm
Swing angle of blade
360°
Min turning radius
7.6m
Lift height of blade
445mm
Cutting depth of blade
787mm
Blade cutting angle
Forward 47°/backward 5°
Blade side shift
Left 673mm / right 673mm
Max tractive force
78kN
Max speed ( forward/reverse )
38/23.6 km/h
--
--
ENGINE
MODEL
WP6G190E22
Type
Inline, water cooled,dry cylinder liner,direct injection
Rated power/speed
140kW/2200r/min
Engine displacement
6750ml
Cylinder bore/stroke
105/130mm
Min fuel consume ratio
210g/Kw.h
Max torque
760Nm
Emission standard
Euro2
TRANSMISSION SYSTEM
Transmission type
Fixedshaft power shift
Torque converter
Single stage single phase three element
Gears
Six forward three reverse
Speed at forward gear I
0-5km/h
Speed at forward gear II
0-9km/h
Speed at forward gear III
0-11.5km/h
Speed at forward gear IV
0-19.5km/h
Speed at forward gear V
0-23.6km/h
Speed at forward gear VI
0-38km/h
Speed at reverse gear I
0-5km/h
Speed at reverse gear II
0-11.5km/h
Speed at reverse gear III
0-23.6km/h
HYDRAULIC SYSTEM
Type
Open-type system
System pressure
21Mpa
FILL CAPACITY
Fuel
270L
Hydraulic oil
132L
Options
Front blade
Equipped
Rear ripper
Equipped
2>Description:Â As a product of high speed, high efficiency, high accuracy and multiple purposes, G9180 is developed by SDLG on the basis of advanced technology of European, can be used for ground leveling and grooving, scraping slope, bulldozing, ploughing snow, loosening, compacting, material arrangement and mixing works, and is widely applied in construction operating condition of road, airport, defence engineering, mine construction, road construction, water conservancy construction and farmland improvement and so on.
3>Advantage:Â
The perfect combination of Weichai engine and advance 6WG180 gearbox helps realize best capability and fuel efficiency. This product adopts high pressure gear pump and imported multi-way valve and double pump and two circuit hydraulic system, and the system pressure of whole machine can reach 21Mpa (competitors are only 18Mpa), thus improving the operating efficiency.
It is applied with European advanced technology and equipped with the dual cylinder-driven pallet-type working device, helping to realize large driving force and high reliability. The cable can rotate with load and provide precise operation which is domestic industrial originated.
Swing frame is made of lubrication-free and maintenance-free composite bearing, with small frictional coefficient, high reliability and is shock-proof and water-proof, hydraulic lock cylinder location is adopted and is easy to operate.
This standard cab is fully sealed and safe and reliable, With wide visual field, operators can see the front wheel and the blade clearly thus to improve the operating precision.
Electrical system of the entire machine has centralized control, three-stage alarm electronic monitoring system, digitalized stepping instrument display, high man-machine interaction and is convenient for detection and maintenance.
Front wheel can tilt 18 degree which reduce the turning radius and improve operating flexibility of whole machine, when working on a slope, the front wheel will tilt to increase adhesion and improve stability for the whole machine. In addition, the tilting front wheel will offset side force from materials to the blade and prevent front wheel from sideslip.
