Good Quality Batch Pre-Expander for EPS

October 20 19:01:41, 2018

  • Model NO.: FDS1100, FDS1400, FDS1660
  • Automation: Automatic
  • Certification: CE, ISO9001:2008
  • Condition: New
  • Warranty: 1year
  • Transport Package: Standard Export Package
  • Type: EPS Foam Machine
  • Computerized: Computerized
  • Plastic Type: EPS
  • Application: EPS Foam for EPS Plant
  • Trademark: VST
  • Origin: Zhejiang, China (Mainland)
Main Features:
1.1.   Our Batch Pre expander uses Screw Conveyor to convey raw material
1.2.   In our machine after conveying, material goes to weighing system, so every batch input material is the same weight.
1.3.   We have good design in piping system to get even steaming and even venting. At steam pipe entry, we use Japanese pressure reducing valve to ensure stable pressure steam some to machine. We use four steam inlet pipes evenly distributed at the bottom of expansion chamber, also we use four vent pipes for evenly venting, which enables same pressure everywhere in the expansion chamber
1.4.   We use level control for material discharging. The main principle is same input material weight, same expansion pressure, same material level to discharge material, so density come also same and even.
1.5.   We use 80 points PLC, each point for one action.
1.6.   Our machine uses SS304 for expansion chamber
1.7.   Our steaming plate is SS304 plate, using X-ray to cut the steam slots
1.8.   For normal steel, we use thicker material. So our machine is much heavier, and looks much stronger.
Item Unit FDS1400I-II FDS1660I-II
 
Expansion chamber		 Diameter mm Dn1400 Dn1660
Volume m3 2.1 4.8
Usable volume m3 1.5 3.5
 
Steam 		Entry Inch 2"(DN 50) 2"(DN 50)
Consumption Kg/cycle 8~10 11~14
Pressure Mpa 0.4~0.8 0.4~0.8
 
Compressed  air 		Entry Inch 2"(DN 50) 2"(DN 50)
Consumption m3/cycle 0.5~0.8 0.7~1.1
Pressure Mpa 0.5~0.8 0.5~0.8
 
Drainage		 Upper drain port Inch 5"(DN 125) 6"(DN 150)
Lower drain port Inch 4"(DN 100) 5"(DN 125)
Lower exhaust port Inch 3"(DN 80) 4"(DN 100)
Material conveying line Inch 8"(DN 200) 8"(DN 200)
 
 
Capacity		 4g/l 230 Kg/h 360 Kg/h
7g/l 320 Kg/h 480 Kg/h
9g/l 450 Kg/h 560 Kg/h
15 g/l 750 Kg/h 900 Kg/h
20g/l 820 Kg/h 1100 Kg/h
Connected load /power Kw 22.5 24.5
Expanded density Kg/m3 10~40 10~40
Density  tolerance % ±3% ±3%
Overall dimension
(L*W*H)		 mm 6500*4500*4500 9000*3500*5500
Weight Kg 4500 4800
 Good Quality Batch Pre-Expander for EPS
Good Quality Batch Pre-Expander for EPS
Good Quality Batch Pre-Expander for EPS