Heat transfer oil circulation pump related product knowledge
Brick making machine Spare Parts are a must for every brick making machine
A variety of brick molds can meet the needs of different bricks. One brick-making machine can be equipped with multiple molds.
Suitable raw materials: sand, stone, cement, can be added a large number of fly ash, slag, steel slag, coltan, ceramic grain, pearl rock, wine, gypsum powder, feed, and other industrial waste.
Cement brick molds stone road cement wall brick mold foam concrete board interlocking clc hollow concrete blocks brick mold can replace the normal block machine to produce the concrete blocks for your house building, also the final block from this mold is with smooth surface and easy to paint and decorate the indoor and outdoor wall. Most importantly, this block can be 100% interlock together which will save more cement during building and more stable structure for the whole house.
Brick Machine Spare Parts,Block Machine Molds,Hollow Brick Machine Molds,Block Making Machine Mold, Brick Molds Zhengzhou SMART Machinery Manufacture Co.,Ltd , https://www.simamax.com
Heat transfer oil circulating pump for the following areas 1, the oil and chemical industry: polymerization, condensation, distillation, distillation, melting, etc .;
2, oil industry: fatty acid distillation, oil decomposition, lipidation, etc .;
3, synthetic fiber industry: polymerization melting, spinning, extending, etc .;
4, textile printing and dyeing industry: heat-setting, drying, hot-melt dyeing;
5, thermal oil pump plastic and rubber industry: hot pressing, calendering, extrusion, vulcanization molding;
6, paper industry: dry, corrugated paper processing;
7, wood industry: plywood, fiber molding, wood drying, etc .;
8, the construction industry: asphalt heating, etc .; In addition, is still widely used in machinery industry, pharmaceutical production.
BRY HTF circulation pump performance range (by design point)
1, the flow of 1 500m3 / h;
2, lift 10-125m;
3, temperature -20oC-350oC; BRY type hot oil pump model said: BRY50-32-200A BRY 50-32-200 ABRY said: hot oil pump 50 said: the inlet diameter of the pump (mm) 32 said: HTF circulation Pump outlet diameter (mm) 200 said: Nominal diameter of the impeller (mm) A said: the first cut of the impeller diameter Description: impeller diameter in order to A, B, C, said the maximum diameter is not cut shown.