YC910 Series  YC910 Series air jet loom adopts the eccentric rockshaft bringing strong balance and solid stability, reducing the defect of running vibration of the loom body. Thus the ground vibration reduces 35%. The DSP system specializes in fast calculation and fast transmission mode, remaining no interference from outside, guaranteeing its super-performance with high speed and energy-saving mode.The upgraded comprehensive frame-guiding device, using double upper beams, has been installed with supporting plates to safeguard the heald frames in the front and the back, reducing vibration when the machine runs at a high speed, ensuring the stability under high speed and lessening the wear and tear of heald frames. YC910, with an increased speed of 20%, and power saving mode of 40%, it triumphed to reduce a great amount of electricity charge for the weaving factories, and also saved cost of purchase of air compressor equipment.  Technical parameter: Reed width: 170, 190, 210, 230, 280, 340, 360 cm Color: monochrome, double color, 4 color, 6 color Start mode: Ultra high speed starting motor, push-buttons of start,stop,and the push-button of low moving of the reversing function.    Loom speed: 600-900 Weft: Fixed main nozzle + swing main nozzle + auxiliary nozzle + profile reed. Auxiliary solenoid valve: An auxiliary manifold solenoid valve Opening: An active cam shedding (electronic dobby) Beating: Bilateral four-bar beating up mechanism with eccentric shaft (six bar beating up)  Let Off: Electronic let off (ELO) Take Up: Electronic take-up (ETU) Selvage: Gear planetary selvage on both sides  Weft breakage: Double weft sensor with reflective mode The warp breakage: Electrical device of warp-stopping function Machine-halting display: Screen display, multi-function machine-halting display lamp Weft: mechanical scissors Pattern type: plain weave, twill, satin fabric Rolling diameter: 600 mm Disc diameter: 800 mm Electrical control system: High resolution large screen VGA,  color image display, human-machine interface with touching screen  Â
YC910 Series  YC910 Series air jet loom adopts the eccentric rockshaft bringing strong balance and solid stability, reducing the defect of running vibration of the loom body. Thus the ground vibration reduces 35%. The DSP system specializes in fast calculation and fast transmission mode, remaining no interference from outside, guaranteeing its super-performance with high speed and energy-saving mode.The upgraded comprehensive frame-guiding device, using double upper beams, has been installed with supporting plates to safeguard the heald frames in the front and the back, reducing vibration when the machine runs at a high speed, ensuring the stability under high speed and lessening the wear and tear of heald frames. YC910, with an increased speed of 20%, and power saving mode of 40%, it triumphed to reduce a great amount of electricity charge for the weaving factories, and also saved cost of purchase of air compressor equipment.  Technical parameter: Reed width: 170, 190, 210, 230, 280, 340, 360 cm Color: monochrome, double color, 4 color, 6 color Start mode: Ultra high speed starting motor, push-buttons of start,stop,and the push-button of low moving of the reversing function.    Loom speed: 600-900 Weft: Fixed main nozzle + swing main nozzle + auxiliary nozzle + profile reed. Auxiliary solenoid valve: An auxiliary manifold solenoid valve Oil pump
