How Isolation Transformers Work
Poly Aluminium Chloride is referred to as PAC. It is also commonly called basic aluminum chloride or coagulant. It is a new type of high-efficiency inorganic polymer flocculant. Its aqueous solution is a hydrolysis product between aluminum trichloride and aluminum hydroxide, with a colloidal charge, so it has a strong adsorption on suspended matter in water. To achieve the purpose of condensing suspended matter in water. The Polyaluminium Chloride produced by Jinhe are white, yellow or light yellow powder.
Polyaluminum Chloride has the functions of removing suspended matter, COD and BOD, degreasing, decoloring, removing heavy metals and residual chlorine in water, etc. It is mainly used for purification treatment of tap water and industrial wastewater. Polyaluminum chloride is currently the most widely used inorganic coagulant in water purification processes. There is no need to adjust the pH value of the source water, it has a wide range of adaptation to the pH value of the source water, which is unmatched by traditional inorganic low molecular coagulants.
Polyaluminium Chloride is used in metallurgical, electric power, tanning, medicine, printing and dyeing, papermaking, chemical and other industries` sewage treatment.It`s also used in tap Water Treatment. Its coagulation effect forms flocs (also known as alum flowers) fast, the particles are large and heavy, and the sedimentation is fast. The applicable PH value ranges from 5 to 9, and has the characteristics of low dosage, low cost, high activity, convenient operation, wide adaptability, and low corrosion.
Poly Aluminium Chloride,White Poly Aluminium Chloride,Yellow Poly Aluminium Chloride,Brown Poly Aluminium Chloride HENAN JINHE INDUSTRY CO.,LTD , https://www.hnironoxide.com
How Isolation Transformers Work
What is the working principle of the isolation transformer? The working principle of the isolation transformer is the same as that of the ordinary transformer. All of them use the principle of electromagnetic induction. The following is a detailed introduction for the customer, hoping to help you.
Isolation transformers are not all 1:1 transformers. Power supplies for controlling transformers and tube equipment are also isolation transformers. Power supplies such as tube amplifiers, tube radios, and oscilloscopes and lathe control transformers are isolation transformers. For example, a 1 to 1 isolation transformer is commonly used for the maintenance of color TVs. Isolation transformers are used more often and are also used in air conditioners.
Although there is an isolation circuit between the primary and secondary windings of the transformer, the capacitance between the two windings can still cause static interference between the two circuits at high frequencies. To avoid this interference, the primary and secondary windings of the isolation transformer are generally placed on different stems to reduce the capacitance between the two; the primary and secondary windings are also placed concentrically but are added between the windings. Electrostatic shielding for high anti-interference properties.
Electrostatic shielding is to set a piece of non-closed copper or non-magnetic conductive paper between the original and secondary windings, which is called shielding layer. Copper or non-magnetic conductive paper is connected to the housing with wires. Sometimes, in order to obtain better shielding effect, a shielded enclosure is also covered in the entire transformer. The winding lead terminals are also shielded to prevent other external electromagnetic interference. In this way, the primary and secondary windings can only have magnetic coupling, and the equivalent capacitance between them can be less than 0.01 pF, which greatly reduces the capacitance current between the primary and secondary windings, effectively suppressing the power supply and other circuits. Various kinds of interference.