1. Roller material:ASTM1045 chrome plated surface with chrome 2. Shaft diameter: ¢70mm material: SAE1045 with quenching and tempering 3. Can turn horizontal and vertical, there is one cylinder on the bottom, so can push the press parts horizontal
5
Hydraulic System Â
   1. Hydraulic power: 5.5kw 2. Working pressure: 12Mpa adjustable 3. Solenoid valve: 1 group 4. Hydraulic oil: 46# hydraulic oil 5. Quantity :1  Â
6
Computer Control Cabinet
Â
 1. Programmable setting of profile length and quantity 2. Operating system language: English and Chinese 3. Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase 4. Computer used to control length & quantity. 5. Machine will automatically cut to length and stop when required quantity is achieved 6. Length inaccuracy can be amended easily. 7. Unit of length: millimeter 8. PLC brand: Panasonic
Chrome Carbide Overlay Plate consists of a mild steel base plate onto which a highly abrasive resistant welded overlay is deposited using an open arc or submerged arc process. Plate sizes typically range from 3/8″ to 1-1/2″ in thickness; widths vary from 4′ to 8′ and lengths from 8′ to 20′. The overlay deposit is either one or two layers, measuring 1/4″ or 3/8″ thick. Bead widths vary according to the method of manufacture but typically measure about 1-1/2″ wide and are randomly check cracked. Check cracking occurs as a natural phenomenon during welding and is controlled by the chemical composition of the overlay or by cooling methods.
The finished plates can be formed and fabricated. Holes can be cut with either plasma or laser cutting machine.
ADVANTAGES
· Superior abrasion/impact resistant
· Outlasts AR steels by an average of 4 to 6 times
· Abrasion resistant properties up to 2012°F (1100°C).
· Weld overlay can be applied to two sides for added strength and durability
· Many thickness combinations
· Can be cut, formed and welded
· Pipe fabricated 2″ ID and over
· Low maintenance cost and easy installation.