IGBT Inverter DC Air Plasma Cutter (CUT-160)
Main Features
- Simple and reliable controlling procedure, low malfunction rate, easy to maintain.
- Using compressed air which guarantees safe and reliable operation.
 - Built-in over-heat protection, over-voltage protection, under voltage protection and lack of compressed air pressure protection.
 - Adjustable output current to satisfy the cutting demands of various materials and thickness of working plates.
- Fast cutting speed, smooth incision, no deformation and high utilization rate of sheet materials.
 - Apply for vehicles, shipbuilding, boiler, chemical, food, medicine, machinery processing kitchen environment etc.
- Can be connected to the CNC, to realize the cutting automation.
Inverter DC Air Plasma Cutter Specifications
| Model | CUT-100 | CUT-120 | CUT-160 | CUT-200 | |
| Rated input voltage(V) | 3PH AC380V | 3PH AC380V | 3PH AC380V | 3PH AC380V | |
| Rated input capacity(KVA) | 15 | 18 | 30 | 41 | |
| Rated input current(A) | 21.7 | 26 | 45 | 62 | |
| No-load voltage(V) | 380 | 310 | 380 | 380 | |
| Output current(A) | 30-100 | 30-120 | 40-160 | 40-200 | |
| Rated working voltage(V) | 120 | 128 | 144 | 160 | |
| Rated duty cycle (%) (40ºC,10min) | 60% | 100A×60% | 120A×60% | 160A×60% | 200A×60% |
| 100% | 77A×100% | 93A×100% | 124A×100% | 155A×100% | |
| No-load loss(W) | 100 | 100 | 100 | 100 | |
| Efficiency(%) | 85 | 85 | 85 | 85 | |
| Power factor(%) | 0.93 | 0.93 | 0.93 | 0.93 | |
| Method of arc start | Non contact | Non contact | Non contact | Non contact | |
| Net weight(KG) | 35.2 | 36 | 55.5 | 63 | |
| Dimention of machine(mm) | 650×340×590 | 650×340×590 | 700×360×638 | 700×360×638 | |
Inverter DC Air Plasma Cutter Accessories:
earth clamp*1pcs, cable joint*1pcs, grounding cable*3meters, pressure regulator*1pcs, gas hose*0.6meter,hose hoop*3pcs, cutting torch*1pcs
Inverter DC Air Plasma Cutter Selection Guide
| Material | Sheet thickness   (mm) | Arc start  | Current range(A) | Model |
|
Carbon steel, stainless steel, low alloy steel |
0.3-16.0Â | Contact | 20-40A | CUT-40Â |
| 1.0-25.0 | Contact | 20-60A | CUT-60Â | |
| 1.0-30.0Â | Uncontact | 20-100A | CUT-100 | |
| 1.0-35.0 | Uncontact | 20-120A | CUT-120Â | |
| 1.0-40.0Â | Uncontact | 20-160A | CUT-160Â | |
| 1.0-50.0 | Uncontact | 20-200AÂ | CUT-200Â | |
| Â Copper &Â alloy, Aluminum &Â alloy | 0.3-8.0 | Contact | 20-40A | CUT-40Â |
| 1.0-13.0Â | Contact | 20-60A | CUT-60 | |
| 1.0-15.0 | Uncontact | 20-100AÂ | CUT-100Â | |
| 1.0-18.0 | Uncontact | 20-120A | CUT-120Â | |
| 1.0-20.0 | Uncontact | 20-160A | CUT-160 | |
| 1.0-25.0 | Uncontact | 20-200A | CUT-200Â |
Package &Â Shipping
Packaging Details:Â Â Carton package with inside plastic bag and foam /Â wodden packing/Packing according to customers requirements.
Delivery: within (25-30) days after confirmation of the deposit.
Accessories:
The accessories of CUT:
1) 4m CUT torch.
2) 1.2m earth cable.
3) face shield, brush.Â
---------
About us:1) 30 years manufacturing experience in welding machines.
  With more than 300 employees and 50,000 m2 work shop.
2) Full-range of welding machines: MMA/TIG/MIG/Air plasma cutter.
  With European CE certificate and 28 national patents.
3) Focus on middle-high market(America and Europe) with reliable quality and competitive price.
4) 1 year warranty, patents products 3 years.
5) OEM is available.
 Any products meet your demand, please feel free to contact us as below.
Thanks.
 Efficient IGBT Inverter DC Air Plasma Cutter
Main Features
- Simple and reliable controlling procedure, low malfunction rate, easy to maintain.
- Using compressed air which guarantees safe and reliable operation.
 - Built-in over-heat protection, over-voltage protection, under voltage protection and lack of compressed air pressure protection.
 - Adjustable output current to satisfy the cutting demands of various materials and thickness of working plates.
- Fast cutting speed, smooth incision, no deformation and high utilization rate of sheet materials.
 - Apply for vehicles, shipbuilding, boiler, chemical, food, medicine, machinery processing kitchen environment etc.
- Can be connected to the CNC, to realize the cutting automation.
Inverter DC Air Plasma Cutter Specifications
| Model | CUT-100 | CUT-120 | CUT-160 | CUT-200 | |
| Rated input voltage(V) | 3PH AC380V | 3PH AC380V | 3PH AC380V | 3PH AC380V | |
| Rated input capacity(KVA) | 15 | 18 | 30 | 41 | |
| Rated input current(A) | 21.7 | 26 | 45 | 62 | |
| No-load voltage(V) | 380 | 310 | 380 | 380 | |
| Output current(A) | 30-100 | 30-120 | 40-160 | 40-200 | |
| Rated working voltage(V) | 120 | 128 | 144 | 160 | |
| Rated duty cycle (%) (40ºC,10min) | 60% | 100A×60% | 120A×60% | 160A×60% | 200A×60% |
| 100% | 77A×100% | 93A×100% | 124A×100% | 155A×100% | |
| No-load loss(W) | 100 | 100 | 100 | 100 | |
| Efficiency(%) | 85 | 85 | 85 | 85 | |
| Power factor(%) | 0.93 | 0.93 | 0.93 | 0.93 | |
| Method of arc start | Non contact | Non contact | Non contact | Non contact | |
| Net weight(KG) | 35.2 | 36 | 55.5 | 63 | |
| Dimention of machine(mm) | 650×340×590 | 650×340×590 | 700×360×638 | 700×360×638 | |
Inverter DC Air Plasma Cutter Accessories:
earth clamp*1pcs, cable joint*1pcs, grounding cable*3meters, pressure regulator*1pcs, gas hose*0.6meter,hose hoop*3pcs, cutting torch*1pcs
Inverter DC Air Plasma Cutter Selection Guide
| Material | Sheet thickness   (mm) | Arc start  | Current range(A) | Model |
|
Carbon steel, stainless steel, low alloy steel |
0.3-16.0Â | Contact | 20-40A | CUT-40Â |
| 1.0-25.0 | Contact | 20-60A | CUT-60Â | |
| 1.0-30.0Â | Uncontact | 20-100A | CUT-100 | |
| 1.0-35.0 | Uncontact | 20-120A | CUT-120Â | |
| 1.0-40.0Â | Uncontact | 20-160A | CUT-160Â | |
| 1.0-50.0 | Uncontact | 20-200AÂ | CUT-200Â | |
| Â Copper &Â alloy, Aluminum &Â alloy | 0.3-8.0 | Contact | 20-40A | CUT-40Â |
| 1.0-13.0Â | Contact | 20-60A | CUT-60 | |
| 1.0-15.0 | Uncontact | 20-100AÂ | CUT-100Â | |
| 1.0-18.0 | Uncontact | 20-120A | CUT-120Â | |
| 1.0-20.0 | Uncontact | 20-160A | CUT-160 | |
| 1.0-25.0 | Uncontact | 20-200A | CUT-200Â |
Package &Â Shipping
Packaging Details:Â Â Carton package with inside plastic bag and foam /Â wodden packing/Packing according to customers requirements.
Delivery: within (25-30) days after confirmation of the deposit.
Accessories:
The accessories of CUT:
1) 4m CUT torch.
2) 1.2m earth cable.
3) face shield, brush.Â
---------
About us:1) 30 years manufacturing experience in welding machines.
  With more than 300 employees and 50,000 m2 work shop.
2) Full-range of welding machines: MMA/TIG/MIG/Air plasma cutter.
  With European CE certificate and 28 national patents.
3) Focus on middle-high market(America and Europe) with reliable quality and competitive price.
4) 1 year warranty, patents products 3 years.
5) OEM is available.
 Any products meet your demand, please feel free to contact us as below.
Thanks.
Â
1. Final Drive and Travel Motor Moldel
EC140B, EC210B, EC290B, EC240B, E360B, EC460B
SK60-1/2/3/5/6, SK100-1/2/3/5/6, SK120-1/2/3/5/6/, SK200-1/2/3/4/6,SK200-7,SK210-7,SK230-6,SK220-3/6, SK300-3,SK330-6
PC40-1/2/35, PC60-1/2/3/5/6/7, PC70-7, PC100-1/2/3/5/6, PC120-1/2/3/5/6, PC200-1/2/3/5/6/7, PC220-1/2/3/5/6/7, PC300-1/3/5/6, PC400-1/3/5/6, PC450-6
E312, E312B/C, E320, E320B/C/D, E325, E325B/C/D/L, E330, E330B/C/D, E345, E345B/C/, E200B, E240, E240B, E300B, E311, E331B
UH07, EX55, EX60-1/2/3/5/6, EX75, EX100-1/2/3/5, EX120-1/2/3/5/6, EX200-1/3/5/6, EX220-1/2/3/4/6, EX270, EX300-1/3/5/6, EX400-1/2/3/5/6, ZX100-1/2, ZX200-1/6, ZX210, ZX230, ZX230-5,ZX240, ZX330, ZX450
DH55,S55,DH55-5,DH220-3/5/7,DH280-3,DH320,DH320-2/3,DH450
R60-7,R130-5/7,R200,R200-5,R210-3/5/7,R200-7,R220-5/7,R260-5,R290-3,R290-7,R300-7,R320,R420
SH60,SH75,SH100,SH120-1/2/3/5,SH200-1/A3,SH300-2
HD250,DH250-2/5/7,KD400,HD400-5/7,HD700-7,
HD770-1/2,HD800-5/7,HD820-1/2/3,HD900-5/7,HD1023,HD1430,HD880,HD900-7,HD880-7
2. Final Drive and Tranvel Motor Excavator Manufactures
For Caterpillar, Komatsu , Hitachi ,Deawoo , Hyundai , Kobelco , Samsung , Sumitomo , Volvo, Bobcat, Case, Airman, Doosan, IHI, JCB, John Deer, Komatsu, Kubota, Kobelco, Mitsubishi, Yanmar, Thomas, TEREX, Takeuchi , Sumitomo Excavators
3. Final Drive and Travel Motors Brand
Nachi Final Drive and Travel Motor
Nabtesco Final Drive and Travel Motor
Kawasaki Final Drive and Travel Motor
Kabaya Kyb Final Drive and Travel Motor
Bosch Final Drive and Travel Motor
KAYABA KYB Final Drive Trvavel Motor For 20T Mini Excavators
Another Excavator Parts We also Supplied.Excavator parts: Excavator Engine Part, Excavator Undercarriage Parts, Excavator final drive, Excavator Main Valve , Excavator Hydraulic Pump.
Excavator Final Drive
Hitachi Final Drive,Excavator Swing Motor,Final Drive,Travel Motor
Jining Kunpeng Construction Machinery Equipment Co., Ltd , https://www.excavatorenginepart.com