LB-D Pulse bag filter type dust collector

*Function characteristics:

Pulse jet bag filter in the ventilation engineering, product processing and air purification system USES is very successful. Pulse bag filter using the concept of innovation of the traditional product design scheme of, not only appearance, graceful and unique structure, excellent performance. 
1,using highly efficient low consumption injection device, achieve low pressure, short pulse injection, an off-line ash removal, increased the strength of ash removal. 
2, air distribution is reasonable,  downstream filtration, make the dust in the filter state have coagulation sedimentation effect, at the same time reduce the bag load and frequency of injection. 
3, filter mouth with elastic ring seal, rigor, tear open outfit is convenient. 
4, filter bag framework using resistance welding, surface smooth without weld mark, solves the wear phenomenon of filter bag and frame, long service life of filter bags. 
5, spray torch should according to the different position with different hair short tube, to ensure that each filter bag dust evenly, prevent damage of deviation and the filter bag. 
5, use "compound micro porous membrane filter material, dust removal efficiency > 99.9%, suitable for high wet dust gas dust removal. 
6, using pulse injection way of ash removal. With soot cleaning effect is good, high purification efficiency, large processing capacity and long life of filter pocket, maintenance workload small, safe and reliable operation, etc. 
Pulse jet bag filter can be widely used in cooking, refractory, metallurgy, building materials, chemical, food, mining machinery, agricultural chemicals, electronics and other industrial and mining enterprises of industrial dust fibrous dust purification. Pulse jet bag filter with a variety of forms, such as inverse spray, for the spray, annular injection, etc. Using low resistance valve, blowing air pressure to allow less than 392 Kpa as low pressure injection; Using high resistance valve, blowing air pressure must be higher than 392 kpa is called high pressure injection.

 **Technical parameters:

 

LB-DY All-in-one Bag Filter Dust Collector

 

 

Working principle: The dust from the dust source go through the dust hood and air pipe inlet into the box body, because of the airflow velocity plummeted, sudden expansion, large dust particle size under the action of its weight, separated from the air and into dust drawer. The rest of the dust particles due to the filter bag's collision, hook, electrostatic effect, stranded on the inner wall of the filter bag, after purification, the air is being exhausted from the outlet.

 

Technical Parameter:

 

Model	Airflow(m³/h)	Power(Kw)	Cartridge Bag Q'ty(pcs)	Valve Q'ty	Weight(KG)	Size(mm)
LB-DY-16	960-1050	0.75	16	4	252	830*1100*2200
LB-DY-20	1100-1300	1.5	20	5	285	1010*1100*2200
LB-DY-24	1400-1600	1.5	24	6	315	1190*1100*2200
LB-DY-28	1800-2000	2.2	28	6	345	1370*1100*2200
LB-DY-30	2100-2300	2.2	30	6	712	1810*1367*2378
LB-DY-40	2400-2750	3.0	40	8	790	1990*1370*2378
LB-DY-48	3000-3300	3.0	48	8	845	1990*1550*2378
LB-DY-56	3500-3800	5.5	56	8	951	1990*1730*2378
LB-DY-63	4200-5000	5.5	63	9	992	2170*1730*2378

 

LB-C Muti-Cartridge filter type dust collector 

 

*Function characteristics: 

 

1)Low emission concentration, can the filter the dust smaller than 0.2 um. 

 

2)Good permeability, low gas resistance. 

 

3)Soot is convenient, automatic dust clean; Ensure the continuity of production and efficiency. 

 

4)Dust collection container is convenient to disassemble, compact connection with filter funnel, dust does not leak. 

 

5)Filter cylinder surface is smooth, good waterproof and oil proof performance. 

 

 

LB-PC Cartridge Filter Dust Collector

  

  

**Technical parameters:

Model	airflow(m³/h)	cartridge filter Q'ty	Valve specification	Dimension(mm)
				L	H	W	air inlet dia
LB-PC-12	12000-15000	12	DMF-T-40	1960	2770	1362	550
LB-PC-16	16000-20000	16	DMF-T-40	1960	2770	1960	650
LB-PC-20	21000-25000	20	DMF-T-40	1960	2770	1960	700
LB-PC-24	24000-30000	24	DMF-T-40	3920	2770	1362	750
LB-PC-32	32000-40000	32	DMF-T-40	3920	2770	1960	850
LB-PC-40	41000-48000	40	DMF-T-40	3920	2770	1960	900
LB-PC-48	50000-57000	48	DMF-T-40	5880	2770	1960	1000
LB-PC-60	60000-70000	60	DMF-T-40	5880	2770	1960	1200

 

 

 

 

 LB-CY Cartridge Filter Dust Collector

 

  

 Technical Parameter: 

 

ModelÂ	Airflow M3/H	Power  KW	Cartridge Q'ty	Valve Q'ty	Weight	Size mm
LB-CY-4	2200-3000	3.0	4	4	456	1440*1808*1050
LB-CY-6	3500-4500	5.5	6	6	592	1800*1808*1050
LB-CY-8	4800-6500	5.5	8	8	672	2210*1928*1050
LB-CY-12	7500-8600	7.5	12	4	1105	2250*2077*1400
LB-CY-15	8900-9750	11	15	5	1301	2950*2077*1400

 

 Specifications:  

 

This facility is designed integrated, of tight structure, small footprint, electrinic system with PLC auto-controlled and easy operation.

 

 This type dust collector equipped with high vacuum fan but with low noise.

 

 Imported soft hose, heat and abrasion resistance, smooth inside wall lowered the wind resistance.

 

 

LB-GD high Vacuum welding Dust Collector

 Product Advantage: 

 This kind of filter with low noise high negative pressure fan, not only with low noise,but also produce quite high negative pressure. Can connect to multiple station convulsions dust removal at the same time.

 

The equipment adopts the integrated design, compact structure; cover a small area l, and electric control system use PLC for automatic control, easy to operation. The high pressure dust removal system adopts imported and heat-resistant, wear-resistant high pressure composite suction hose, its inner surface smooth wind resistance losses small.

 

According to the different work station requirements, its methods of catching dust can be used in a high pressure suction mask, universal environmental protection welding torch, grinding wheel.

 

 

 Application Place: 

 

High vacuum model dust collector mainly applied to purification dry, no oil, no corrosion of the smoke gas during welding, cutting and grinding process, can connect with the Robot arm for the operation condition of the robot welding.

 

 Technical Parameter: 

 

ModelÂ	Airflow M3/H	Power  KW	air intake Mm	Voltage V/HZÂ	Pressure  pa	Size mm
LB-GD-300	260~350	2.2	Φ75	380/50	23000	1200*720*1250
LB-GD-520	460~550	7.5	Φ100		40000	1760*720*1520
LB-GD-1000	1000-1200	18.5	Φ150		30000	1950*870*1800
LB-GD-2000	1800~2000	25	Φ200		31000	2000*900*1800
LB-GD-2500	2100~2500	29	Φ250		27000	2100*950*1800

 

 

Company information;
 

Qingdao Loobo Environmental Protection Technology Co.,Ltd is one of the biggest enviromental protection products manufacturer, located in Qingdao city of china,specialized in alll kinds of portable fume extractor, downdraft benches(grinding dust removal worktable), central fume purification system, flexible suction arm,etc.

 

We have more than ten years export experience ,all of our products with the ISO9001 and CE certification, the quality can be guaranteed.

 

We have our own R&D department , have a variety of style range to meet any of your requirments and had established the economies of scale, so can dilivery fast and provide can beat your competitor's price.

 

Best Regards

 

Miss Juno

 

Qingdao Loobo Environmental Protection Technology Co.,Ltd
Factory Address: No.19, Hechuan Road, Licang Industry Park, Qingdao, China

Phone: +86-15865519554

Fax    : +86-532-8068 7573
 
 
Website: 
www.loobohb.cn/indexen.asp  (English version)
www.loobo.cn (Chinese version)
 

 

Zinc Alloy Die Casting products in order to prevent surface oxidation and the appearance is only superficial. Zinc alloy material properties that well to accept the material surface treatment affordable. So, the usual surface treatment, what does?

As follows:
1: Baked paint (baking enamel) baked paint is a kind of modern technology, the use of paint and then use the high temperature heat quickly paint will penetrate the surface of the material was baked, baked paint device specified by a customer should be the equipment end of the use of poison gas recovery equipment will be toxic substances quickly to accept to be ruled out. This process allows the paint is not easy to fade off, partly because of harmful substances of the paint already baked paint process is absorbed exclude, so in the future use will not be released into the atmosphere, the people and the environment can be reduced to a minimum.

2: phosphating (phosphatizing) is a chemical and electrochemical reactions is the formation of the phosphate chemical conversion coating process, the formation of phosphate conversion coating is called a phosphate film. The aim is to give the base metal to provide protection to prevent the metal is corrupt to a certain extent. For the primer before painting, powder coating or electrophoresis, to improve the adhesion and anti-corrosion ability.

3: (chromating) chromate solution and metal effects on the surface of the trivalent or hexavalent chromium layer process used for the processing of zinc, aluminum, magnesium alloy and the appearance of decorative surface treatment, such as : car handle, sanitary products, construction (decorative) metal, door and window handles. The same time, the chromium can be divided into the following categories (color) sand chrome, matt chrome,Shiny chrome, pearl chrome (painted pearl chrome), the ancient green (antique brass) and so on.

4: electrostatic powder (electrostatic powder spraying) in order to avoid the paint defects, the introduction of the electrostatic powder coating technology. Electrostatic powder coating is a new technology, the principle is the high-voltage electrostatic spray resin powder paste on the base metal surface, forming a protective film. This layer of protective film itself is environmentally safe, In addition, the protective film can also be sealed to the metal surface of the substrate to prevent the release of harmful objects. This new type of "solid paint" instead of liquid paint, which is characterized by the release of formaldehyde and other harmful gases can also be recycled. The same time, it can produce rich, saturated colors can be sprayed to any pattern, is very suitable to use.

Zinc Casting Surface Finished

Zinc Casting Surface Finished, Die Casting Surface Finish, Surface Finished Casting Parts

Ningbo Zhenhai Xinxie Machinery Co.LTD , https://www.xinxie-diecasting.com