JCB Releases T4F New Wheeled Telescopic Loader TM320

The main features of the new model products are:

The configured JCB EcoMAX engine meets Stage IV/T4F emission standards and does not require DPF.

The maximum load lifting capacity is 3.2 tons, and the maximum lifting height is 5.2 meters.

4-speed power shift gearbox.

Articulated steering frame.

Reliable copper-graphite bushings significantly extend the service interval between the frame articulation and boom lubrication.

Job site

Lift performance

The TM320 has the same load capacity as the existing TM320 Wastemaster and can lift a 3.2-tonne load to a working height of 5.2 meters. At a maximum reach of 2.95 meters, the maximum lift capacity is 1.75 tons. This superior lifting and reachability makes the TM320 a versatile one that is particularly suitable for the loading and unloading of materials at the construction site, as well as for use in small stone mines or concrete mixing plants.

The JCB EcoMAX 4.4-liter engine on the TM320 is equipped with a rated power of 93 kW. It complies with the EU Stage IV / US Tier 4F emission standard and uses JCB's high-efficiency SCR selective catalytic reduction system, eliminating the need for a DPF diesel particulate filter to reduce customer's post-production service. cost.

Telescopic loader TM320

JCB Chief Innovation and Growth Officer Tim Burnhope said: “The T4F's JCB EcoMAX engine has been used and validated by JCB's Loadall. The very compact installation allows for more efficient use of AdBlue without compromising the power of the engine. Torque and fuel consumption."

The configured 4-speed JCB power shift transmission can achieve a maximum travel speed of 40 km/h. Load-sensing hydraulic system, with a maximum flow of 140 litres per minute, ensures maximum performance and efficiency of the complete machine. The power shift transmission can be selected in the automatic shift mode or the manual shift mode. The selection of the forward and reverse shift positions can be achieved by a switch mounted on the servo handle.

Construction work

The optional hydraulic reversing fan is especially suitable for dusty working environments. Manual activation can clean the dust on the radiator. In addition, the standard cylinder end buffering function can greatly improve the driver's operating experience. The optional automatic smooth running system SRS can greatly increase the material holding ability during driving and reduce the material spill caused by road bumps.

The bright and spacious cab is equipped with a full-color display that allows the driver to see the work information and alarm display of the machine at a glance. When the driver starts the machine, the system automatically completes inspections of engine oil, coolant, and wiper fluid level, greatly saving time and ensuring that key routine inspections are performed. The installed copper-graphite bushings greatly extend the service interval between frame articulation and boom lubrication – up to 500 hours.

Optional full-color rearview camera and JCB LiveLink remote monitoring system. (This article comes from JCB )