The new inspection standard for motor vehicles came into effect on March 1st, and the competent authority can issue notifications on February 26th, of which 3 new items need to be equipped with new inspection instruments . Because time is too tight, the 36 inspection lines of the 18 security inspection agencies in Jinan are unable to provide annual inspection services. This involves all trucks and most passenger vehicles that have expired.

If you want to have an annual inspection, you can't find a place. If you don't overdue, you'll break the law. This can ruin the owners.

Jinan 38 test lines are missing new instruments

At 1pm on the 18th, Shandong Huaxing Auto Testing Service Co., Ltd. was on security inspection. The staff members just started to work. Mr. Shi, a shuttle driver from a college and university in Jinan City, drove a 17-seat medium-sized passenger vehicle to come to trial. I thought that the trial would be completed soon, only to be informed by the staff and unable to test his car.

"There is no equipment, there is no way to carry out security checks on passenger cars and trucks." Mr. Shi said that the car he drives needs to go through a trial in March. He cannot review it now. He can only come back before the end of March, otherwise he will not be overdue. It is likely to be punished by the traffic police.

But the Huaxing company has this situation? Reporter found through investigation that not only Huaxing, Jinan City, 18 motor vehicle security inspection agencies all 36 lines of inspection because there is no inspection equipment and can not be detected on trucks and some passenger cars. It is not Mr. Shi who is affected, but rather all the trucks and most passenger cars that are due for the trial.

When 18 reporters were surprised at this situation, the staff of a security inspection agency said: “Not only Jinan, I am afraid that there is not a testing station in the province that has such an inspection instrument.” The staff explained that the reason there is no instrument is very simple, the inspection item is new, "the equipment does not have time to buy."

3 days before the implementation of the new standard

This will also begin with the “Accident Vehicle Safety Technology Testing Project and Measures” (commonly known as the new standard for motor vehicle inspection) issued by the General Administration of Quality Supervision, Inspection and Quarantine and the Standardization Management Committee on December 22 last year.

This new standard adds three inspection items for the vehicle's safety inspection, including the vehicle body reflective marker, driving recorder, and passenger passenger passage and approach. The new standard was issued on December 22 last year and went into effect on March 1 this year. It is said that there is a buffer period of more than two months in the middle. Why does the security inspection agency still have no time to purchase inspection equipment?

In this regard, the person in charge of several security inspection agencies said that when the new standards were issued, they did not receive notifications with corresponding inspection instruments. Until February 26, the Provincial Bureau of Quality and Technical Supervision issued an announcement through the official website: Since March 1 of this year, applications for vehicle models that contain body reflective marking detection items must be equipped with special inspection instruments for anti-reflection coefficients; the application models include a driving recorder. Test items should be equipped with special inspection instruments as required by the standard. If the above-mentioned special inspection instruments cannot be equipped as required, inspection reports of the corresponding models shall not be issued from March 1.

The reporter saw on the official website of the Provincial Bureau of Quality Supervision that the announcement was made on February 17, but it was released on February 26. At this time, there are only three days left until the new standard takes effect.

When is there no timetable for security?

Han Daoqiang, deputy chief of motor vehicle inspection management department of the Vehicle Administration Division of Jinan City, said that according to the requirements, all trucks need to put reflective signs on them. Most passenger cars need to install a tachograph or have passenger passages, but they are affected by the shortage of inspection equipment. So far, the involved vehicles are not able to carry out the annual review. For the same reason, the newly-purchased vehicles cannot register for a new car because they cannot go online.

Since most of the affected goods vehicles and buses are commercial vehicles, they cannot be listed or cannot be put on the road without proper annual review. Owners like Mr. Shi are obviously not calm. In fact, many car owners have reported this to the newspaper or the citizen service hotline.

When can you check the car? The person in charge of the security inspection agency said "not to say."

Yang Jingbin, head of Jinan Zhengyuan Motor Vehicle Inspection Co., Ltd., said that at present, they have purchased instruments for detecting reflective signs and passenger passenger passages and approaches, but special instruments for detecting driving recorders have not yet been purchased. After the three kinds of instruments are purchased, they must also pass the quality supervision department's inspection and calibration, and then apply for the quality supervision department to approve the expansion of the inspection items. All of these will take time, and when they can finish, they will not be sure.

Owners look forward to the transitional measures

It is reported that the Provincial Bureau of Quality and Technical Supervision issued a notice on March 12 requesting qualified security inspection agencies to apply for an extension before conducting an annual inspection of the vehicles covered by the new regulations. Only after approval can the inspection be conducted. At the same time, for the application for the extension of security inspection agencies, the provincial bureau requires the municipal and provincial review centers to optimize the process and approve as soon as possible.

According to informed sources in the industry, there is a reason why the quality supervision department requires the issuance of a notice issued by a security inspection agency late. Although the General Administration of Quality Supervision, Inspection and Quarantine issued a new standard in December last year, it was not until February 9 this year that the provincial quality supervision department got the paper text, and then organized expert comparisons to study the differences between the old and new standards and determine the security check. The instrument that the organization needs to acquire. "The notification at this point in time is already the fastest."

In addition, informed sources pointed out that security inspection agencies are not fully equipped with security inspection equipment is the reason for the time, more troublesome than this is that some testing instruments do not currently have corresponding products, "want to buy can not buy."

In this case, the owner of the vehicle proposed that the traffic control department and the quality supervision department should strengthen communication and provide a temporary transitional approach so as not to affect the annual audit of the vehicle owners and reduce the losses before the security inspection agencies deploy new equipment.

6 Points Galvanized Steel Pipe

6 Points Galvanized Steel Pipe,Galvanized Steel Tube,Corrosion-Resistant Galvanized Steel Pipes,Hot-Dipped Galvanized Welded Steel Pipe

Tianjin Gongjiantiangang Steel Pipe Co., Ltd. , https://www.gjalloytube.com