Model NO.: KP-80
Engine Type: Lb20
Engine Power: 5.0HP
Speed No-Load (Rpm): 3600
Flexible Pipe (M): 4-8
Trademark: KZW
Transport Package: carton
Specification: 3"
Origin: China
Model NO.: KP-80
Engine Type: Lb20
Engine Power: 5.0HP
Speed No-Load (Rpm): 3600
Flexible Pipe (M): 4-8
Trademark: KZW
Transport Package: carton
Specification: 3"
Origin: China
Kerosene Oil Engine Water Pump (KP80)The kerosene oil engine water pump is a self-prime centrifugal water pump, which burnt kerosene, but start by the oil. Then engine with the pump set together. There are several models by the different head size.
Features1. The kerosene water pump consumes minimum amount of oil while delivering maximum power output. It is lightweight and generates little noise during running.
2. The self-priming pump comes with an air-cooled, 4-stroke gasoline engine that features an overhead valve.
3. Enclosed casing
4. Ease of operation
5. The pump does not need any other power source. It provides safe, reliable functioning.
6. This device is commonly used to pump water for irrigation or industry use.
Specifications
| Item |
Kerosene Engine Water Pump |
| Type |
KP50(2") |
KP80(3") |
| Motor |
Air-cooled, 4-stroke, single-cylinder |
| Motor Power |
Ray-out 5.0HP |
Ray-out 5.0HP |
| Speed |
3600 RPM |
3600RPM |
| Fuel |
Kerosene & gasoline when starting(90#) |
 |
| Tank Capacity |
Kerosene 3.4L Gasoline 0.17L Lubricating oil 0.6L |
| Inlet Diameter |
50MM |
80MM |
| Outlet Diameter |
50MM |
80MM |
| Suction Lift |
8meter |
8meter |
| Pump Lift |
31meter |
31meter |
| Flow Rate |
30m3Â /h |
60m3Â /h |
| Start-up Method |
Recoil start |
Recoil start |
| Shaft Seal |
Carbon ceramic |
Carbon ceramic |
| Pump Inner Face |
Aluminum |
Aluminum |
| N.W./G.W. |
29kg /30kg |
33kg/34kg |
| Package Size |
52×41×46 |
52×41×46 |
| Package Method |
Carton |
Carton |
Â
Kerosene Oil Engine Water Pump (KP80)The kerosene oil engine water pump is a self-prime centrifugal water pump, which burnt kerosene, but start by the oil. Then engine with the pump set together. There are several models by the different head size.
Features1. The kerosene water pump consumes minimum amount of oil while delivering maximum power output. It is lightweight and generates little noise during running.
2. The self-priming pump comes with an air-cooled, 4-stroke gasoline engine that features an overhead valve.
3. Enclosed casing
4. Ease of operation
5. The pump does not need any other power source. It provides safe, reliable functioning.
6. This device is commonly used to pump water for irrigation or industry use.
Specifications
| Item |
Kerosene Engine Water Pump |
| Type |
KP50(2") |
KP80(3") |
| Motor |
Air-cooled, 4-stroke, single-cylinder |
| Motor Power |
Ray-out 5.0HP |
Ray-out 5.0HP |
| Speed |
3600 RPM |
3600RPM |
| Fuel |
Kerosene & gasoline when starting(90#) |
 |
| Tank Capacity |
Kerosene 3.4L Gasoline 0.17L Lubricating oil 0.6L |
| Inlet Diameter |
50MM |
80MM |
| Outlet Diameter |
50MM |
80MM |
| Suction Lift |
8meter |
8meter |
| Pump Lift |
31meter |
31meter |
| Flow Rate |
30m3Â /h |
60m3Â /h |
| Start-up Method |
Recoil start |
Recoil start |
| Shaft Seal |
Carbon ceramic |
Carbon ceramic |
| Pump Inner Face |
Aluminum |
Aluminum |
| N.W./G.W. |
29kg /30kg |
33kg/34kg |
| Package Size |
52×41×46 |
52×41×46 |
| Package Method |
Carton |
Carton |
Â
Motor Gear
Motor Gear,Steel Bite Gear Parts,316L Steel Bite Gear Parts,Stainless Steel Bite Gear Parts
Dongguan New Decoration Material Technology Co., Ltd. , https://www.xsjmim.com