KW Generator for Natural Gas Biogas Coal Gas LNG CNG LPG
CE approved Product Description
1. +20 years professional manufacturer.
2. Wide power range: 10kw-5000kw gas generator, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLC control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
7. Holding many patents
8. Perfect service system(Sales, Installation, Debugging and after-sale service)
 9. Full Range: our products mainly include natural gas generator, biogas generator, biomass generator, coal gas generator, syngas generator, coal-bed gas generator, coke oven gas generator, diesel generator etc. 
 
Product Features
Main spare parts for gas generator:
1.Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3. Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor. 
5. Mixer: IMPCO
6. Spark plug: STITT
 
Genset worksite requirements for gas generator
The worksite needs to meet following basic requirements:
 a)  Ambient temperature between -40ºC~40ºC;
 b)  Relative humidity less than 95%(35ºC);
 c)  Site elevation not higher than 3500m;
 d)  For outdoor installation, simple rain shelter is required.
 
Requirements for Biogas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC
2. Pressure 80~200kpa, Changing Rate≤1kpa/min
3. H2S≤20mg/Nm³
4. Content of CH4≥70%
5. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
6. Moisture Content≤40g/Nm³
Some Tips for gas generator
Higher content of sulfur and ammonia is not only seriously corrodes the spark plug, but also increase the lubricant's acid value, and then gen-set internal parts will be corroded partly. That will shorten the gen-set's life time. So the gas scrubbing is very important!
Technical Parameters for 10-600kw Natural Gas Generator Set

Model Number	LHNG
Brand Name	LVHUAN
Prime Power	8-480KW
Rated Power	10-600KW
Gas Mixed Mode	Outside
Rated Speed	1500rpm/1000rpm
Rated Frequency	50/60HzÂ
Rated Voltage	400V/230VÂ
Rated Current	18-1080A
Phase	AC 3-Phase, 4 Wire
Gas Pressure	80-200kpa
Intake Mode	Natural Intake/Supercharging and Inter Cooler
Voltage Stability	≤±2%
Voltage Transient	≤±10%
Voltage Stable Time	≤1s
Heat Consumption	≤9.8mj/kw.h
Lubricant Consumption	1-1.3g/kw.h
Noise	75-105dB(A)
Cylinder Number	4/6/12
Cylinder Bore	100/105/135/138/190mm
Starting System	DC 24V Electric Motor
Sparking Mode	Spark Plug
Cooling Method	Circlulating Water Cooling
Lubricant Method	Passive and Flying Lubricant
Isolation Class	H
Protection	IP23
Alternator	Siemens, Standford, Leroy Somer, Marathon, etc.
Power Factor	0.8 LaggingÂ
Exciting Method	BrushlessÂ
Colour	You DecideÂ
Certificates	ISO 9001:2008, CE
Warranty	1 Year
Overheal Time	More Than 30000h
Type	OpenÂ
Control System	Automatic Alarm SystemÂ
Size	1450*700*1100mm~6000*1970*2735mm
Weight	600kg~12000kg

 
Applied Range for Natural Gas Generator
1. Oil Field
2. Industrial Zone
3. Petroleum Chemical
4. Using Natural Gas Generator Set as Standby Power Source
5. Supplying Power for Auxiliary Engine which work in Oil Well.
 
Service committee for gas generator:
1. Pre-sale service: 
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
 
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
 
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We  provide one year guarantee period and lifetime service.
 
Plentiful spare part supply for gas generator:
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification, keep good quality.
 
FAQs for purchasing gas generator:
1. Are you factory? and where is your factory?
Yes, we are. Our factory is located in Zhangqiu Longshan subdistrict, Jinan city, Shandong province, Welcome to visit our factory.

2. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
 
3. What's the genset warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
 
4. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
 
5. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
 
6. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.

7. What is your regular delivery time?
20 days after order releasing.

Certificates & Patents for gas generator: We are committed to providing every product superior in quality. 
 
Professional Manufacturer for gas generator
 
Showcase for gas generator
 

Customers Trust for Lvhuan Gas Generator
 
Professional Packing & Loading Team for Gas Generator
 
Please feel free to contact Sarah for any question.

KW Generator for Natural Gas Biogas Coal Gas LNG CNG LPG
CE approved Product Description
1. +20 years professional manufacturer.
2. Wide power range: 10kw-5000kw gas generator, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLC control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
7. Holding many patents
8. Perfect service system(Sales, Installation, Debugging and after-sale service)
 9. Full Range: our products mainly include natural gas generator, biogas generator, biomass generator, coal gas generator, syngas generator, coal-bed gas generator, coke oven gas generator, diesel generator etc. 
 
Product Features
Main spare parts for gas generator:
1.Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3. Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor. 
5. Mixer: IMPCO
6. Spark plug: STITT
 
Genset worksite requirements for gas generator
The worksite needs to meet following basic requirements:
 a)  Ambient temperature between -40ºC~40ºC;
 b)  Relative humidity less than 95%(35ºC);
 c)  Site elevation not higher than 3500m;
 d)  For outdoor installation, simple rain shelter is required.
 
Requirements for Biogas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC
2. Pressure 80~200kpa, Changing Rate≤1kpa/min
3. H2S≤20mg/Nm³
4. Content of CH4≥70%
5. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
6. Moisture Content≤40g/Nm³
Some Tips for gas generator
Higher content of sulfur and ammonia is not only seriously corrodes the spark plug, but also increase the lubricant's acid value, and then gen-set internal parts will be corroded partly. That will shorten the gen-set's life time. So the gas scrubbing is very important!
Technical Parameters for 10-600kw Natural Gas Generator Set

Model Number	LHNG
Brand Name	LVHUAN
Prime Power	8-480KW
Rated Power	10-600KW
Gas Mixed Mode	Outside
Rated Speed	1500rpm/1000rpm
Rated Frequency	50/60HzÂ
Rated Voltage	400V/230VÂ
Rated Current	18-1080A
Phase	AC 3-Phase, 4 Wire
Gas Pressure	80-200kpa
Intake Mode	Natural Intake/Supercharging and Inter Cooler
Voltage Stability	≤±2%
Voltage Transient	≤±10%
Voltage Stable Time	≤1s
Heat Consumption	≤9.8mj/kw.h
Lubricant Consumption	1-1.3g/kw.h
Noise	75-105dB(A)
Cylinder Number	4/6/12
Cylinder Bore	100/105/135/138/190mm
Starting System	DC 24V Electric Motor
Sparking Mode	Spark Plug
Cooling Method	Circlulating Water Cooling
Lubricant Method	Passive and Flying Lubricant
Isolation Class	H
Protection	IP23
Alternator	Siemens, Standford, Leroy Somer, Marathon, etc.
Power Factor	0.8 LaggingÂ
Exciting Method	BrushlessÂ
Colour	You DecideÂ
Certificates	ISO 9001:2008, CE
Warranty	1 Year
Overheal Time	More Than 30000h
Type	OpenÂ
Control System	Automatic Alarm SystemÂ
Size	1450*700*1100mm~6000*1970*2735mm
Weight	600kg~12000kg

 
Applied Range for Natural Gas Generator
1. Oil Field
2. Industrial Zone
3. Petroleum Chemical
4. Using Natural Gas Generator Set as Standby Power Source
5. Supplying Power for Auxiliary Engine which work in Oil Well.
 
Service committee for gas generator:
1. Pre-sale service: 
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
 
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
 
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We  provide one year guarantee period and lifetime service.
 
Plentiful spare part supply for gas generator:
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification, keep good quality.
 
FAQs for purchasing gas generator:
1. Are you factory? and where is your factory?
Yes, we are. Our factory is located in Zhangqiu Longshan subdistrict, Jinan city, Shandong province, Welcome to visit our factory.

2. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
 
3. What's the genset warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
 
4. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
 
5. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
 
6. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.

7. What is your regular delivery time?
20 days after order releasing.

Certificates & Patents for gas generator: We are committed to providing every product superior in quality. 
 
Professional Manufacturer for gas generator
 
Showcase for gas generator
 

Customers Trust for Lvhuan Gas Generator
 
Professional Packing & Loading Team for Gas Generator
 
Please feel free to contact Sarah for any question.

Customized Flooring

Customized Flooring is more like a service we are offering. Some of customers would prefer a pre cut flooring for they boats rather than a DIY job with our normal sheets.

Besides, we also offer helm station pad, cooler top mat which is produced by CNC machine. Helm pad is a good tool for captain standing a long time on the water, the thicker material makes it soft, and reduce the pain from long time standing. The cooler top mat can be sticked on the top of cooler, making the cooler to be more functional as you can stand or seat on it with traction.

Customized Flooring,Helm Station Pad,Eva Stomp Pad,Fishing Measurement Pad,Eva Fishing Ruler,Eva Fish Ruler

Huizhou City Melors Plastic Products Co., Limited , https://www.melorsmat.com