When a person works for a long time, there will be some fatigue in both the body and the eyes, and a proper rest must be taken. The same is true for cars. If you run for a long time, you may experience fatigue, especially for car lights. After a long time, you must check and maintain. Today, Beimai.com will introduce you to the maintenance and repair knowledge of car lights . The eyes are more bright.

Checking the lamp failure of the exterior lamp is an extremely quick and simple task. However, comprehensive system maintenance of the exterior lighting is not that simple. Timely maintenance of the exterior lights is critical to the driver as it not only affects the comfort of the drive, but is also directly related to the safety of the drive. Usually, before getting a reminder, it is difficult for the owner to realize that the headlights, taillights, turn signals or parking lights are not working properly. Incidentally, the replacement of the burnt bulb is very simple, and the cost of DIY is lower than the charging standard for the maintenance of the lighting system at the repair station.

In more cases, the failure of the lamp is not limited to small problems such as lamp burnout, socket rust or plug damage. It is often necessary to take professional diagnostic techniques to analyze the root cause of the fault. Even for low-priced cars, the internal and external luminaires are controlled by the host computer. For those luxury cars, only the front headlights are controlled by three computers.

If your car is equipped with daytime running system DRLs (DaytimeRunningLamps), you must first understand how these devices work. For example, some daytime running lights are not turned on before the engine is started; there are some daytime running lights. If the parking brake has not been canceled, the daytime running lights will still not work properly even if the engine has been started. If the vehicle is equipped with a light control lamp (that is, when the external light is dim to a certain extent, the system has the function of automatically turning on the headlights), it is worth checking the operation of the lamp during the process from the weakest to the strongest. Also don't ignore checking the auto-off timer. If the system is equipped with a timer, set it to a delay.

If the headlights are damaged, they are usually replaced with similar luminaires. Some vehicles are equipped with a high-intensity discharge headlight HID that generates a high-density light source through a high-voltage arc discharge generated by its pre-designed electronic system. Note that ordinary quartz-halogen bulbs cannot be used here. In addition, check the headlight lens for cracks, because although the surface crack does not affect the lighting performance of the headlights, moisture will penetrate into the lamp along the cracks, which will definitely reduce the life of the lamp.

The calibration of the headlights' illumination direction should also be included in the list of maintenance items, as the headlights must be able to provide good forward illumination for the driving vehicle in order to ensure the safety of the driver.

Grasp the key, but also must not forget to check other lights, such as turn signals, license plate lights, width lights, parking lights, backup lights and brake lights (including the middle high brake light CHMSL). In addition, many vehicles also use fog lamps as standard equipment or popular options. Fog lights are generally installed in the lower position of the car, so they are extremely vulnerable to stone damage. In addition to checking the lighting system during maintenance Outside, the cracks in the headlight lens should not be ignored.

These are the general knowledge of the maintenance and repair of the car lights that Beimei.com has compiled for everyone. I hope it will help everyone. Don't underestimate the maintenance of car lights. In the dark night, the lights in the heavy rain and fog provide me with safety protection. Therefore, don't neglect the maintenance of the lights. Only then can the car be better for us. Service to ensure safe driving.

Flexible Diamond Resin Bond Product

Diamond Abrasive Resin Bond products are made with a patented method engineered to produce an extremely uniform finish. In particular our super fine micron sized diamond pre-polishing products are designed to produce a finish that polishes quickly and easily. In less critical applications or less demanding materials the finish off of our super-abrasive resin bonded products can be left without proceeding to a final.
Diamond Sanding Belts Suppliers
Diamond Lapidary Belts
Lapidary Sanding Belts
Diamond Coated Abrasive Belts
Lapidary Polishing Wheels
Eastwind Diamond Belts
Diamond Grit Sanding Belts
Diamond Lapidary Sanding Belts
Lapidary Belt Sander

Diamond Soft Grinding Wheel

Diamond Resin Soft Grinding Wheel

diamond surface grinding wheel,Resin bond diamond grinding wheel,Diamond Resin Soft Sanding Belt,Diamond Smoothing Pad,Diamond Resin Bonded Products,Lapidary Diamond Resin Soft Polishing Wheels,Soft Wheel - Resin Bond,Diamond Resin REZ Soft Grinding Wheel

Hans Superabrasive Material Co., Ltd. , https://www.hansuperabrasive.com