Mechanical Flow Meter
Description :
Our feather flags is one kind of Beach Flags
.Its shape like Knife or Feather ,or Aero ,Blade ,Mistral or Sirocco .
Our common material for feather flags is
100% 110 g or 135 g knitted fabric with digital printing or dye sublimation
printing . Single side printing or double sides printing .
Our feather flags are supplied with a
choice of bases, making them extremely versatile and easy to install ,in any
position. Base choices include: water holding base ( for indoor or outdoor use ),
ground stake ( for outdoor soft ground use) or a drive - on car foot ( for outdoor
use on hard ground ).
Size list of our feather flags :
Glass Fibre Poles + Aluminum
Poles
Rod
total height
2.8
meter (9.2feet )
3.4meter
(11.1feet )
4.5meter(14.77feet
)
5.5meter
(18.0feet )
Flag
size
50*200cm
60*240cm
70*340cm
80*410cm
Vertical
Height
260cm
300cm
400cm
500cm
Glass Fibre
Rods
Rod
total height
300CM
(9.84 feet)
400CM
(13.13ft)
500cm
(16.4 feet)
Flag
size
65*210cm
75*320cm
80*420
cm
Vertical
Height from floor
280cm
360cm
450cm
Our Feather Flag Shape :
1.
Feather Flag Convex
2.
Feather Flag Straight
3.
Feather Flags Concave :
The difference
between glass fibre poles + aluminum poles and full glass fibre rods :
The first one ,just the top part pole is gass fibre ,so
it can be bent
The second one is full glass fibre rods from bottom to
top .This quality is much better ,because this material is soft and can be bent
The printing
tech for our feather flags :
1) Digital printing
2) Dye sublimation printing ( hot transfer printing )
--- this quality is much better than digital printing
The base for
our feather flags to choose :
Feather Flags,Feather Banners,Feather Flag Banners,Feather Banner Flags Golden Mouth Advertising (H.K)Co.,Ltd. ( Jie Da Advertisement Co.,Ltd) , http://www.cmykprinted.com
Mechanical Flow Meter
Description:
K44 flow meter is a nutating-disk meter that measures the exact quantity of the dispensed fuel or lubricant. It is designed for non-commercial use only. This flow-meter is reliable, inexpensive, easy to install and simple to calibrate on the workplace. The Pulser model is fitted with a pulse emitter for connection to a fuel management system.
Thanks to reduced flow resistance, it can also function by gravity.
Specifications:
Flow-rate (range): 20÷ 120 l/min (5, 3÷ 32 gal/min).
Precision: ± 1% of flow range after calibration.
Repeatability: 0, 2%.
Max. Operating pressure: 10 bar (142 psi).
Bursting pressure: 30 bar (426 psi).
Readout system:
K44, 4-digit subtotals (max 9999 litres), 7-digit totals.
Resolution: 0.1 litre.
Pulser card type: "Open collector", frequency: 10 pulses/litre, power supply: 6-24 V DC, max 10 mA.
For final price with complete accessories ,please contact with Angelina
(whatsapp : 0086 13427921037 )