Mining project construction fire protection requirements
Transparent powder coating,Resin,Transparent HLM Powder Coating CO,.Ltd , https://www.holymepowder.com
2. The site's electromechanical equipment must be inspected by a special person and the problem should be dealt with in a timely manner.
3. Strengthen the management of various fire sources in winter construction. Do not ignite and heat in the building.
(2) Requirements for construction fires such as welding and cutting 1. Wells, workshops, wells, upper and lower openings, underground rooms and fire hazard areas shall be equipped with adequate fire-fighting equipment according to fire prevention regulations; no open fire shall be allowed within 20m near the wellhead; And the underground welding has safety measures and fulfills the approval procedures.
2. For electric welding and cutting operations, the operating procedures must be strictly observed to clean up the combustible materials on site; when welding at high places, there is a special person for fire monitoring. 