SB116 Series Two-position Two-way Solenoid valve

 

No-water Hammer impact, Low noise, stable working, large flow, long service life

 

Speciality:

  

Working at Zero Pressure and used below 90degree

 

It can be used in gas, water, oil, weak acid, alkali

 

Low Noise, No-water hammer impact, stable working, large flow, long service life

 

Coil Model: BD-A-3

 

Change to Ex-proof & suitable armature, it can used as Ex-proof valve, the coil made from thermosetting plastic encapsulating, the protection class IP65, Plug confirms with ISO standard 

 

Specification: 

 

Media: Gas, water, oils, weak acid. alkali

Working Type: Fake-Direct Action 

Pattern: Normally Close

Orifice: 10-20mm

Kv Value: 2-4.8

Connection Port: G1/4'' ~ 1''

Working Pressure: 0 ~1.0 Mpa

Protection Class: IP65

Power: AC: 14-17VA, DC: 8-20W

Insulation Class: F class

Valve Body Material: Aluminum / Brass / Stainless Steel

Seal Material: NBR /VITON

Response Time: 0.05S

 

We are manufacturer for valve series, such as ball valve, butterfly valve. solenoid valve, pulse valve etc. Our goods have been sold to the USA, Germany, Holand, Italy, France, Korea and other countries and regions. Our products, liquid valves, liquid gas check valve, liquid line solenoid valve, liquid relief valve, liquid crystal light valve, liquid solenoid valve, liquid level control valve, liquid flow control valve, liquid pressure relief valve, liquid nitrogen valve, liquid withdrawal valve, liquid injection valve, liquid line service valve, liquid propane valve, liquid dispensing valve, liquid sampling valve are produced according to the ISO9001: 2000 standards. We hope that we will be your best partner in china. 

Nitriding Screw and Barrel for Rubber

The barrel and the screw work together, the barrel contains the screw, and the screw rotates in the barrel. When the screw rotates and pushes the plastic to move forward in the barrel, the outside of the barrel heats and transfers heat to the plastic in the barrel. In addition, the volume of the screw on the screw is gradually reduced, so that the plastic in the screw groove is squeezed, turned and cut. After the action of various forces such as cutting, it is uniformly mixed and plasticized. As it moves to the front of the barrel, it gradually melts into a viscous fluid state, completing the plasticization of the plastic.

OULIN SCREW is a experienced screw and barrel manufacturer in China, company was established at 2009, we are young and developing group. our screw and barrel can be used in injection molding machine, single screw extruder, counter rotating double screw extruder, co-rotating double screw extruder, planetary screw extruder, rubber extruder and etc.

company started to export screw barrel as OEM factory at 2012, now we have some regular customers in Taiwan, India, Spain, Chile, Italy, Iran, Slovenia and etc. OULIN SCREW will take every order seriously and guarantee the quality, with customers` support, we believe one day OULIN SCREW will be reliable brand in the world.

Nitriding Screw And Barrel For Rubber,Rubber Nitriding Screw Barrel,Injection Nitrided Screw Barrel,Nitrided Screw Barrel For Sale

ZHOUSHAN JINTANG OULIN MACHINERY CO., LTD. , https://www.oulinscrewbarrel.com