Cone Crusher


 It is widely used in metallurgy, construction, road building, chemicals  and  phosphate industry. 
Hard and mid-hard ore such as iron ore, cooper ore, limestone, quartz, granite, basalt, and dolerite, etc. 


 
 Product Description
 Spring cone crushers are widely applied in metallurgical, construction, road building, 
chemical and phosphatic industry. Cone crushers are suitable for hard and mid-hard rocks and ores, 
Spring cone crushers designed with final size 3-60mm, used to crusher, Marble, Silica sand, Dolomite, 
Basalt, Quartz, Feldspar, Limestone, Granite, Slag. The type of crushing chamber depends upon size of 
feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing,
the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Working Principle
      During operation, the motor of spring cone crusher crushes drives the eccentric shaft shell to turn 
around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force
of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to 
time. In this way, the ores and rocks will be pressed and crooked and crushed. To ensure the precision of
thrust bearing installation in spring cone crusher, installation must be the following steps: first, 
the installation of the thrust bearing should be same to steps of scratching; jaw plate placed in a case 
back should be smooth,if case back has the burr and the remaining sand,please clean up.
Then pour lubricating oil to just the top of jaw plate. then install the middle circle plate and circle plate. 
Finally, install the air eccentric shaft, spherical tile racks, and spindle. When installing air eccentric shaft,
the big gear weight should be placed in the top of small gear,so that the outer end of bevel gear is 
alignment. After spherical wham installed, the gap between spherical bearing seat and the main machine
is as big as possible.
 

Main features and benefits
1. High quality and productivity.
2. less machine stop time.
3. easy maintenance and low cost.
4. unique crushing ability in primary, secondary and tertiary crushing.
  Specification

Y-type Insulation Filter

The thermal insulation Y-type Filter is an indispensable thermal insulation device for water, oil and gas pipelines and various equipment. Clear impurities in the medium to protect the normal use of valves and equipment.

Features of thermal insulation Y-type filter Y-type thermal insulation filter is used as an indispensable thermal insulation device for water, oil, gas pipelines and various equipment, and is usually installed at the inlet of pressure reducing valve, pressure relief valve, fixed water level valve or other equipment. It is used to clear the impurities in the medium to protect the normal use of valves and equipment. The filter has the characteristics of simple structure, small resistance and convenient sewage discharge. Generally, the water filter is 18~30 mesh/inch, and the ventilation filter is 40~100 mesh/inch. If the user has special requirements, the filter can be customized.

Y-Type Insulation Filter,Y Strainer,Y Strainer Stainless,Insulation Filter

Jiangsu Qiantu Trading Co., Ltd. , https://www.qiantupump.com