Shanghai electronic scale weighing instrument fault how to self-test
Frp Store Tank,Underground Frp Storage Tanks,Frp Chemical Storage Tanks,Frp Storage Tank Hebei Chunfeng International Trade Co., Ltd , https://www.cfironcastings.com
Electronic scales often have large and small problems. When electronic scales show problems, we immediately think of weighing instruments. However, because there are many parts related to weighing instruments, we do not know what to do. In fact, when encountering electronic floor scales are not normal or even after booting, we need to do not worry, but analyze the product's possibility of error and find out where to make mistakes based on the actual situation.
(1) After the power is turned on, the electronic scale weighing instrument does not respond.
Solution: Check carefully whether the power cable is in good condition, and if the weighing instrument cable is in good condition, replace the damaged cable and replace it immediately.
(2) When the electronic scale is opened, the weighing indicator shows numbers and there is no regular jump.
Solution: In this type of problem, consider that the junction box is too heavy and should be blown with a hair dryer.
(3) Weighing results are light or heavy after normal boot.
Solution: Recalibrate the electronic scales according to the instruction manual. If the problem is still not resolved after calibration, consider that the sensor has been damaged.
(4) The figure displayed by the weighing instrument is not stable when weighing.
Solution: Check whether the weighbridge is in the horizontal plane and readjust its position.
(5) After the weighing is completed, the weighing object is removed and the weighing instrument is not returned to zero.
Solution: The above situation should be that the signal is attenuated due to line breakage. Look carefully at the electronic scale data line for damage. If so, replace it promptly. ??