Straw pellet mill 1. The machine adopted the bevel gear transmission, compact structure, high transmission efficiency low electricity consumption;  2. The right end of the overload protection device structure;  3. To ensure that the small straw material fast into pellet room, specially designed with a forced feed mechanism; 4. The auger of forced feed structure adopted special uniform materials to feed uniformity;  5. To those fluffy, bulk density light straw adopted twisted dragon blade, screw combination structure ensure the straw conveying uniformly; Sawdust pellet mill 1. Frequency conversion speed-adjusting motor regulating feeding rate, feed screw with variable pitch helical structure, balance feeding and precise control; 2. Conditioner cylinder with large opening structure which is easy to check and maintenance; 3. The conditioner simplified with mist nozzle, it can add proper water as required to make the raw materials achieve the best effect; 4. It can install overboard discharging handle or pneumatic discharging on the chute, which is easy to operate to realize automatic control; 5. Fitting with ring lifting device which is easy to disassembly ring and reduce labor intensity; 6. Large machine adopts magnetic filtering, cooling and fuel cut alarm in a whole of the machine oil cooling lubrication system, force to lubricate main bearing, hollow shaft rear bearing and gear shaft rear bearing; 7.  According to the ring die speed of material, improve pellet effect.
SZLHm508 1.5-2t/h Feed Making Machine More Details of SZLHm508 1.5-2t/h Feed Making Machine Performance Parameter
         Model Parameters
SZLH350-M
SZLH400-M
SZLH420-M
SZLH508-M
Output(t/h)
0.5-1.2
0.8-1.5
2-4
2-5
Main Power(kw)
55
75/90
90/110
110/132/160
High Capacity Complete Wood Pellet Mill Production Line Provide Layout ,Flow design, Manufacture, Installation, Commissioning,Electrical Control and Operation Training. 1Â Construction of all sizes biomass production line (1-20t / h)Â 2Â Tailored to your production plant and a full-service 3Â Can be formulated according to customer requirements, installation
Production Workshop Chart Biomass Production Line 1  1-20t/h Wood pellet production line       2  1-20t/h Palm pellet product production line  3  1-20t/h Rice husk pellet production line    4  1-20t/h Straw pellet production line Biomass Production line Of high-end Schematic view Biomass Production Line Our Services 1  Warranty time: one year, from the date which the product is qualified commissioning. Any damage except the wrong operation during warranty period is repaired freely. But the travel and hotel expenses should be count on buyer. 2  Commissioning services: the product's installation and commissioning at the demand side, our engineers will not leave there untill get your agreement. 3  Training services: our engineers will train your staff to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally. 4  Maintenance services: any malfunction happened, once you enquiry us, we will reply you within 48 hours except the special reasons. 5  Lifelong services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.
Honor Quality Assurance Packaging & Shipping FAQ 1. Will you help with installatino and stuff training ? Of course, we can send our skilled engineers to provide you entire service from the installation, commissioning and training. 2. How do you control the quality? We insist "Expertise create infinite" and always pay great attention to quality control from the very beginning to the end. You can also be reassured by our one-year warranty and CE&BV$SGS Certificates. 3. Can you provide turn- key project? Yes, we have enough experience in installing turn-key projects overseas. 4. Where is your factory located? How can I visit there? Our factory is located in Liyang City, Jiangsu Province, China, near Shanghai. You can fly to Shanghai airport or Nanjing Airport directly. All our clients, from home or abroad, are warmly welcome to visit us!
Packaging: Packing by Wooden case Usually,We also do Other Packaging as Per Customer's Requirement.
Shipping: 1  European Countries: 22-28 days 2 United States: East --13-16 days, West--21-28 days 3 Brazil: 30-40 days 4  Russia: 36 days 5  Asia Countries: 3-5days Â
SZLHm508 1.5-2t/h Feed Making Machine
Product FeaturesÂ
Straw pellet mill 1. The machine adopted the bevel gear transmission, compact structure, high transmission efficiency low electricity consumption;  2. The right end of the overload protection device structure;  3. To ensure that the small straw material fast into pellet room, specially designed with a forced feed mechanism; 4. The auger of forced feed structure adopted special uniform materials to feed uniformity;  5. To those fluffy, bulk density light straw adopted twisted dragon blade, screw combination structure ensure the straw conveying uniformly; Sawdust pellet mill 1. Frequency conversion speed-adjusting motor regulating feeding rate, feed screw with variable pitch helical structure, balance feeding and precise control; 2. Conditioner cylinder with large opening structure which is easy to check and maintenance; 3. The conditioner simplified with mist nozzle, it can add proper water as required to make the raw materials achieve the best effect; 4. It can install overboard discharging handle or pneumatic discharging on the chute, which is easy to operate to realize automatic control; 5. Fitting with ring lifting device which is easy to disassembly ring and reduce labor intensity; 6. Large machine adopts magnetic filtering, cooling and fuel cut alarm in a whole of the machine oil cooling lubrication system, force to lubricate main bearing, hollow shaft rear bearing and gear shaft rear bearing; 7.  According to the ring die speed of material, improve pellet effect.
SZLHm508 1.5-2t/h Feed Making Machine More Details of SZLHm508 1.5-2t/h Feed Making Machine Performance Parameter
         Model Parameters
SZLH350-M
SZLH400-M
SZLH420-M
SZLH508-M
Output(t/h)
0.5-1.2
0.8-1.5
2-4
2-5
Main Power(kw)
55
75/90
90/110
110/132/160
High Capacity Complete Wood Pellet Mill Production Line Provide Layout ,Flow design, Manufacture, Installation, Commissioning,Electrical Control and Operation Training. 1Â Construction of all sizes biomass production line (1-20t / h)Â 2Â Tailored to your production plant and a full-service 3Â Can be formulated according to customer requirements, installation
Production Workshop Chart Biomass Production Line 1  1-20t/h Wood pellet production line       2  1-20t/h Palm pellet product production line  3  1-20t/h Rice husk pellet production line    4  1-20t/h Straw pellet production line Biomass Production line Of high-end Schematic view Biomass Production Line Our Services 1  Warranty time: one year, from the date which the product is qualified commissioning. Any damage except the wrong operation during warranty period is repaired freely. But the travel and hotel expenses should be count on buyer. 2  Commissioning services: the product's installation and commissioning at the demand side, our engineers will not leave there untill get your agreement. 3  Training services: our engineers will train your staff to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally. 4  Maintenance services: any malfunction happened, once you enquiry us, we will reply you within 48 hours except the special reasons. 5  Lifelong services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.
Honor Quality Assurance Packaging & Shipping FAQ 1. Will you help with installatino and stuff training ? Of course, we can send our skilled engineers to provide you entire service from the installation, commissioning and training. 2. How do you control the quality? We insist "Expertise create infinite" and always pay great attention to quality control from the very beginning to the end. You can also be reassured by our one-year warranty and CE&BV$SGS Certificates. 3. Can you provide turn- key project? Yes, we have enough experience in installing turn-key projects overseas. 4. Where is your factory located? How can I visit there? Our factory is located in Liyang City, Jiangsu Province, China, near Shanghai. You can fly to Shanghai airport or Nanjing Airport directly. All our clients, from home or abroad, are warmly welcome to visit us!
Packaging: Packing by Wooden case Usually,We also do Other Packaging as Per Customer's Requirement.
Shipping: 1  European Countries: 22-28 days 2 United States: East --13-16 days, West--21-28 days 3 Brazil: 30-40 days 4  Russia: 36 days 5  Asia Countries: 3-5days Â
