Model NO.: OPW type Automatic Fuel Nozzle
Origin: Wenzhou
Product Description
Production Description:11A Automatic Fuel NozzleJIahao brand JH-11A Automatic Nozzles are made of alloy aluminum and designed with today's customer in mind. Small, trim, light weight, easy and convenient to use. JH-20C Automatic nozzle is improved on base of JH-20A nozzle,with advantage of easy control on low flow rate and automatic shuf-off when spout points to horizon. It can well meet EN131012 European standard.
Â
Â
| Inlet Thread : |
BSPF/NPTÂ 3/4" |
| Diameter of spout : |
13/16" &Â 15/16" |
| Color of insulator: |
red/green/blue/yellow/black |
| MOQ |
10pcs |
| Package: |
10pcs/carton |
| Net Weight: |
13kg |
| Gross Weight : |
14kg |
| Dimension: |
420×340×400mm |
Inlet: BSPF3/4", BSPTF1", BSPT3/4".Â
      BSPT1",NPT3/4",NPT1''
Oil outlet: 15/16"Â
Flux range: 0-60L/min or 0-45L/min.Â
Nominal pressure: 0.18-0.22MPa.Â
Self sealing time: 0.1s (max).Â
Features:Â Automatic nozzles for diesel, kerosene and all kinds of gasoline service.Â
Easily replaced spout simply removes the screwÂ
Spout kits availableÂ
Low-profile aluminum body: Light weight, easier to handle, provides an attractive, image-enhancing appearanceÂ
Vacuum design: Back-sealing designÂ
Selective casting process of bodyÂ
Sand casting technique or high-pressure castingÂ
Technique. High-pressure casting technique can reduce diesel foaming and static electricityÂ
Hold-open rack is available for full service applicationsÂ
One-hand control means easy setting to flow rate for customer's convenienceÂ
Full hand insulator protects both nozzle and vehicle, and insulates user's handsÂ
Available colors: Color chart on inside back coverÂ
Selective splash guardÂ
100% factory tested
| Body |
aluminum |
| Seals |
Buna-N, biton |
| Main stem seals |
viton cased oil seal / graphite with Teflon |
| Main stem |
stainless steel |
Rigid PP/PE/ABS/PC Pelletizing Machine
Rigid PP/PE/ABS/PC Pelletizing Machine
raw material:PE plastic film
final product: PE granules
output:100-800kg/h
cutting type:water ring
Components included in plastic pelletizing machine :
1.feeding conveyor 2. film compacting machine 3. screw barrel 4.fast speed double post non-stop hydraulic screen changer 5. water flush pelletizing system 6. water cooling trough 7.Centrifugal dewatering machine 8.vibration screen 9. conveying blower 10. store silo
Advantages of this plastic pelletizing machine :
PE/PP recycling granulating machine is special equipment for the PE PP film recycling granulating, it equipped with comacting machine which cound pre- compact the film into smaller granules, then easily feed into screw barrel of extruder, its efficiency is high and can improve production capacity and save labour cost.
it has two vacuum exhuasting mouth on extruder barrel which can fully vent the moisture in the material and hence the final granule quality will be very perfect.
at the end of screw barrel, it equipped with double post fast speed hydraulic non -stop screen changer which can effetively filt out the dirty in the plastic melt.
the pelletizing adopts water flush pelletizing which is easier to operate, and the shape and appearance of granule is good.
Rigid Pp/Pe/Abs/Pc Pelletizing Machine,abs granules Machine,pp pe pelletizing line,abs pellets extruder
zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstarmachienry.com