1. Dimensions: Long X Wide X High (excluding protruding parts) =660X1000X1230mm
2. Weight: 500 kg
3. Power supply: 380V±10%, 50Hz/60Hz, three phase
4. Power: 4 KW
5. Air pressure: 0.4-0.8MPa;
6. Clamping mode: pneumatic;
7. Clamping force: >=20KN;
8. Rotation axis: asynchronous motor, 4.0kw;
9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
10. Rotation axis deflection: ≤0.01 mm;

1. Tube OD of chamfer/squaring/deburring: Φ6-80mm;
2. Tube WT of chamfer/squaring/deburring: ≤10mm;
3. Tube OD of flaring: Φ 6-80 mm;
4. Tube WT of flaring:

1. Flaring method: eccentric inner diameter rotary swage;
2. Tube OD of beading: Φ6-75 mm;
3. Tube WT of beading: stainless steel: ≤1mm, aluminum alloy: ≤ 2mm;
4. Beading method: inner diameter rotary swage;
5. Tube min clamp: 15mm (flare tube is based on material and wall thickness);
6. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;

1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
2. After quick change dies, it can complete the tube flaring processing and beading.
3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
4. Thin clamp and thin dies, the minimum length of tube is 15mm, which is the first and best level.
5. Control of the feed cylinder is linkage with the clamp cylinder, the clamping cylinder is automatically clamped when the feed cylinder is started, and then spindle forward for processing, once finish, the spindle retreat, clamp cylinder automatically open.
6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
7. Tube feeding length positioning function, ensure tube process length and repeat precision.
8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.

1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
2. Variable frequency control of motor, to achieve the spindle high precision control.
3. Clamp on the machine cabinet front, it can clamping minimum 15mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
5. Double feed mode: cylinder feed and handwheel feed, control feed speed, make operation smoother and save physical power.
6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.

1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
3. Die adapter: used for installation of flaring dies or beading dies of small tube dimension.
4. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness. 
   
5. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
   

1. Dimensions: Long X Wide X High (excluding protruding parts) =660X1000X1230mm
2. Weight: 500 kg
3. Power supply: 380V±10%, 50Hz/60Hz, three phase
4. Power: 4 KW
5. Air pressure: 0.4-0.8MPa;
6. Clamping mode: pneumatic;
7. Clamping force: >=20KN;
8. Rotation axis: asynchronous motor, 4.0kw;
9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
10. Rotation axis deflection: ≤0.01 mm;

1. Tube OD of chamfer/squaring/deburring: Φ6-80mm;
2. Tube WT of chamfer/squaring/deburring: ≤10mm;
3. Tube OD of flaring: Φ 6-80 mm;
4. Tube WT of flaring:

1. Flaring method: eccentric inner diameter rotary swage;
2. Tube OD of beading: Φ6-75 mm;
3. Tube WT of beading: stainless steel: ≤1mm, aluminum alloy: ≤ 2mm;
4. Beading method: inner diameter rotary swage;
5. Tube min clamp: 15mm (flare tube is based on material and wall thickness);
6. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;

1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
2. After quick change dies, it can complete the tube flaring processing and beading.
3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
4. Thin clamp and thin dies, the minimum length of tube is 15mm, which is the first and best level.
5. Control of the feed cylinder is linkage with the clamp cylinder, the clamping cylinder is automatically clamped when the feed cylinder is started, and then spindle forward for processing, once finish, the spindle retreat, clamp cylinder automatically open.
6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
7. Tube feeding length positioning function, ensure tube process length and repeat precision.
8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.

1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
2. Variable frequency control of motor, to achieve the spindle high precision control.
3. Clamp on the machine cabinet front, it can clamping minimum 15mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
5. Double feed mode: cylinder feed and handwheel feed, control feed speed, make operation smoother and save physical power.
6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.

1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
3. Die adapter: used for installation of flaring dies or beading dies of small tube dimension.
4. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness. 
   
5. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
   

Dried Fruits Equipment

Compared with other processing methods such as canning and freezing, the processing method of dried fruit is relatively simple in equipment and operation, and the production cost is relatively low. The production process of dried fruit is: raw material pretreatment, blanching or soaking in alkali, sulfur fumigation, dehydration, wetting, sorting and packaging.
The pretreated fruit is heated with boiling water or steam or other methods for a short time, which is called blanching. The main purpose of blanching is to use heat to drive out the air in the fruit tissue and destroy the oxidase in the fruit to prevent oxidative discoloration. In addition, after the fruit is blanched, mesh-like fine cracks are formed on the surface, which can speed up the evaporation of water, shorten the drying time, and prevent the generation of large cracks during later heating; blanching can also eliminate and wash away the residue on the surface of the fruit. Microorganisms and dirt.
The temperature and time of blanching vary according to the type, variety, maturity, texture, size, etc. of the fruit. Generally, it is treated in boiling water for 5 to 15 minutes. The purpose of fruit soaking in alkali is mainly to remove the wax through the action of alkali, so as to facilitate the evaporation of water and promote drying. In addition, the fruit is immersed in hot lye, which can remove the microorganisms remaining on the surface and has a disinfection effect.

Dried Fruits Equipment,Dry Fruit Cutter Machine Electric,Fruit Dryer Machine,Fruit Freeze Dryer Machine

Jump Machinery (Shanghai) Limited , https://www.shanghaimachineres.com