Abstract: The vortex flowmeter designed and produced by us has a low rate of failure in terms of failure rate, and the failures that occur are generally solved after we have guided the reinstallation. The first thing to check when the fault occurs is whether the installation is strictly in accordance with the operating instructions. If there is no problem, check the internal problems of the instrument.

1. Failure analysis often occurs when installing vortex flowmeters

In the inspection of vortex flowmeter installation problems, mainly from the instrument installation location, wiring, flow range, pipeline vibration and interference, etc.

Fluid flow in â‘ , after power pipeline, but no output signal

Approach:

First check whether the wiring of the instrument is normal, whether the signal line is broken, check whether the direction of the arrow of the body is consistent with the direction of fluid flow, and check whether the meter is at the lower limit of the flow range;

2. There is no fluid flow in the pipeline after power-on, but there is signal output.

Approach

Check whether the instrument grounding is normal, whether the pipeline is subjected to strong vibration, and check whether the surrounding environment of the vortex flowmeter has strong electromagnetic interference ;

3. The fluid in the pipeline meets the flow requirements, but the signal output is unstable.

Approach

Check if the pipeline introduces strong vibration interference and check if the instrument grounding is normal.

2 , the fault of the meter itself

The fault of the vortex flowmeter itself is mainly from the failure of the sensor probe, whether the detection amplifier is malfunctioning, whether there is a broken wire inside the instrument, whether the body leaks, etc.

1. There is fluid flow in the pipeline after power-on, but no signal output

Approach

Check if the detection amplifier and the detection component are damaged, and the damage should be replaced or replaced in time;

2. There is no fluid flow in the pipeline after power-on, but there is signal output.

Approach

Check if the converter sensitivity is reduced;

3. Simple judgment method for sensor probe failure

Use a multimeter to measure the insulation resistance of the two signal lines. When the temperature is higher than 200 °C, the insulation resistance should be greater than 10MΩ . When the temperature is lower than 200 °C, the insulation resistance should be greater than 2MΩ . If the insulation resistance does not meet the requirements, the detection probe may be faulty, and the sensor should be overhauled ;

4. Simple judgment method of detection amplifier

A simple method for judging the fault of the amplifier: by manually detecting the signal at the input end of the probe at the detection amplifier, it is possible to roughly judge whether it is a fault of the sense amplifier. If no signal reflects the detection amplification;

Summary: From the data we know about the factory, the failure rate of the installation is quite high, so the installation instructions must be strictly installed during the installation of the instrument, and the problems of the instrument itself are mainly used for more than 5 years. Users have more problems.

Barbeque Accessories

A BBQ is a must in summer. When the weather is nice, it's great to have a BBQ outside. There are many different kinds of
BBQs, such as hot dogs, meatloaf, chicken wings, lamb kebabs, corn, groundnuts, and vegetables (peppers, mushrooms,
onions, aubergines, etc...). Just thinking about it makes your mouth water. It's so good! Here are some of our best grilling tools!

1. Lid for melting Cheese cheese
Features.
Quickly melts cheese on burgers or pizzas
Rotating aluminium dome absorbs heat to melt the cheese without overcooking the meat
Grills burgers faster to save time on the grill
9" diameter
With this cover, you can better melt the cheese on the patties and cook them faster in less time. It also allows for more
concentration in the fire, allowing the grilled food in the cover to cook faster, which can save time.

2. BBQ brush specifically for cleaning the grill
Features.
3 brushes in one - clean the same area 5 times faster than a conventional brush!
It covers a large enough area to clean the top, bottom and sides of all grill grates
Features a high-quality stainless steel brush: easily removes food, grease and debris from all types of grill grates
without scratching or damaging the surface
It's a good idea to clean the grill before eating, so that you have a clean grill to grill your food on and it doesn't
stick to the grill too much, this grill brush easily removes food crumbs, grease and other debris from the grill grates.

3. Mould for making mince pies on the barbecue
Features.
Has a non-stick coating and is easy to clean
A great tool for making quick burger patties
In addition to the patties, you can also add other ingredients such as bacon, onions, tomatoes, pepper and cheese.
It's easy to prepare meat for the barbecue, it's very easy to press the meat into the box, fill it up, put the lid on firmly
and it's ready for the barbecue. With it you can easily make the grilled meat filling you want to eat, as you can put
as many ingredients as you want in it and make all kinds of meat fillings: chicken fillings, beef traps, meat and
vegetables mixed together traps, etc. There are infinite combinations.

4. Tongs for the barbecue
Long and durable barbecue tongs are very useful when grilling, as they allow you to keep a distance from the flame
of the grill without burning your hands. It's also very handy to use to turn over, for example when grilling chicken
wings you need to turn them the other way so that both sides are grilled, you can use it to turn over and keep a
certain distance from the grill.

We also have a lot of quality barbecue accessories, so what are you waiting for, hurry up with your enquiry and
wait for your order.

barbeque grill accessories,barbeque tools and accessories,barbeque accessories for men,outdoor barbeque grill accessories,bbq accessories

Ningbo Autrends International Trade Co., Ltd. , https://www.zjouterlead.com