What are the points of the structural features of the inclined guide CNC lathe?
Electric Vehicle,Mini Electric Car,Fully Enclosed Electric Scooter,Fully Enclosed Electric Mobility Scooter JIANGSU ELEGANCE VEHICLE CO., LTD. , https://www.mawayra-ev.com
The nine structural features of CNC lathes for inclined guide rails are as follows: 1. The linear rolling guides for slanted bed CNC lathes meet the requirements of high speed and high efficiency, reduce frictional resistance and temperature rise, improve machining accuracy, and ensure the long-term stability of cutting accuracy.
2. The tool detection device can automatically input the tool tip position data into the CNC system, greatly reducing the time required for tool change and automatically compensating for the wear of the tool tip.
3, oblique bed CNC lathes use domestic or imported high-rigidity horizontal turret tool holder, high positioning accuracy, re-cutting deformation.
4, standard configuration: spindle stepless speed regulation, hydraulic chuck, hydraulic tailstock, horizontal eight-station tool holder, closed protection.
5. The oblique bed CNC lathe adopts an overall inclined bed structure, which can maintain the stability of the machine precision when recutting.
6. X, Z axis servo motor is directly connected to the precision ball screw through the elastic coupling. The precision is high. Both ends of the screw are fixed, which improves the supporting rigidity of the bearing and makes frequent high-speed positioning. Bar distortion is minimized.
7, high-precision, high-rigidity programmable tailstock.
8. In the design of slant bed CNC lathe, the headstock adopts corresponding measures to reduce the thermal deformation of the spindle, so that the spindle can maintain the relative stability of the spindle axis during long-term work.
9, slant bed CNC lathes with full rail protection, cooling box and chip separator and the host separation, to ensure the accuracy of the machine tool from the impact of thermal cutting.
The following is a list of the daily maintenance contents of several CNC slide lathes with common inclination.
1. Clean and lubricate each guideway surface every day. The machine tool with automatic lubrication system should regularly check and clean the automatic lubrication system, check the oil quantity, add lubricating oil in time, and check whether the oil pump starts to oil and stop regularly.
2. Check whether the headstock automatic lubrication system is working properly every day and replace the headstock oil regularly.
3. Pay attention to check whether the cooling fan in the electrical cabinet works normally, whether the air filter is blocked or not, and clean the attached dust.
4. Pay attention to check the cooling system, check the liquid level, add oil or water in time, and clean the oil and water when it is dirty.
5. Pay attention to check the spindle drive belt and adjust the tightness.