Vacuum oil purifier is designed according to different boiling point of water and oil, it is composed of by primary filter, heating system, fine filter, condenser, vacuum tank, fine filter, water tank, vacuum pumps, oil drain pump and the electrical cabinet. Vacuum pump extract air in vacuum tank to form vacuum, the out-side oil by the role of atmospheric pressure, through the inlet pipe into the primary filter to remove large particles, and then into the heating tank. After heating such as 40 to 75 ° C, the oil get through the solenoid valve into vacuum tank, this valve can automatically control the amount balance of oil into and out of the vacuum tank. The heated oil becomes oil mist by sprayer into vacuum tank, the rapid evaporation of water in oil into steam and sucked into condenser by vacuum pump. Water vapor through the condenser back to the liquid water and discharge. The gas in oil is drain out rapidly by vacuum pump. After vacuum tank, the oil get through fine filter to separate the particulate impurities, then clean oil is discharged.

Cell Culture Inserts

Cell and tissue culture technologies have an increasing importance in the fields of basic and applied life science. New culture vessels and new surfaces for cell adsorption are continuously emerging, in order to simulate the internal environment as much as possible for culture of some special cell lines. Logically, using permeable supports with a microporous membrane becomes the basic method for culturing these cells. Permeable supports may effectively improve the culture of polar cells, because these supports allow cells to secrete on and absorb molecules from their basal and apical surfaces to metabolize in a more natural way, as well as to stimulate the in vivo environment to the maximum extent for culturing of some special cell lines.

Feature:

• Sterilized by E-beam, SAL=10^-6.

• Cell Culture Plates are made of high clarity, 100% virgin polystyrene.

• Vacuum Plasma tissue culture treatment.

• Clear lot number for batch traceability.

• Non-Pyrogenic, DNase/Rnase free.

• Innovative edge design for convenient sample loading.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Low protein binding to ensure accurate results.

• Passed the USP VI toxicity test.

• Compatible with most solvents used for fixing and staining.

Cell Culture Inserts,PET Membrane,PC Membrane

Wuxi NEST Biotechnology Co.,Ltd , https://www.nest-biotech.com