YRX-500 truck mounted drilling rig is designed by our engineers; it adopts truck mounted and is a rotary drilling rig. The truck chassis adopts the special crane chassis of brand SINOTRUK, the main transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump,mast are set up on the chassis. This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit. The power of drilling rig comes from the truck engine, the rig setups distribute implement and hydraulic system. We can upset the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine. We can set up a generator (15kw) , so that it is convenient to illuminate or work at night. The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement. The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch system are air operated. The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients
Drilling depth(m)
80/300
Drilling diameter(mm)
1500/500
Rotary speed(r/min)
21.2;36;63.2;100.6;155;20.2(reverse)
Rotary torque(KN)
18;10.6;6;3.8;2.5;18.9(reverse)
Single rope lifting capacity of windlass(KN)
30
The mix lifting capacity of windlass(KN)
180
Single rope lifting capacity of hydraulic hoisting vice(KN)
40
The mix lifting capacity of hydraulic hoisting vice(KN)
160
The lifting capacity of hook(KN)
180
Bearing capacity of mast(KN)
180
The height of mast (mm)
11500
 Bearing capacity(t)
25
Pipe
108*108*7500
Assistant pipe
Φ89*10*5500
Model
CA6DE3-20E3
Rated power(Kw)
147
Rotation speed(r/min)
2300
Weight(kg)
19600
Transport size(L*W*H)(mm)
12160*2490*3440
Working size(L*W*H)(mm)
11110*2490*13110
Â
YRX-500 truck mounted drilling rig is designed by our engineers; it adopts truck mounted and is a rotary drilling rig. The truck chassis adopts the special crane chassis of brand SINOTRUK, the main transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump,mast are set up on the chassis. This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit. The power of drilling rig comes from the truck engine, the rig setups distribute implement and hydraulic system. We can upset the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine. We can set up a generator (15kw) , so that it is convenient to illuminate or work at night. The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement. The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch system are air operated. The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients
Drilling depth(m)
80/300
Drilling diameter(mm)
1500/500
Rotary speed(r/min)
21.2;36;63.2;100.6;155;20.2(reverse)
Rotary torque(KN)
18;10.6;6;3.8;2.5;18.9(reverse)
Single rope lifting capacity of windlass(KN)
30
The mix lifting capacity of windlass(KN)
180
Single rope lifting capacity of hydraulic hoisting vice(KN)
40
The mix lifting capacity of hydraulic hoisting vice(KN)
160
The lifting capacity of hook(KN)
180
Bearing capacity of mast(KN)
180
The height of mast (mm)
11500
 Bearing capacity(t)
25
Pipe
108*108*7500
Assistant pipe
Φ89*10*5500
Model
CA6DE3-20E3
Rated power(Kw)
147
Rotation speed(r/min)
2300
Weight(kg)
19600
Transport size(L*W*H)(mm)
12160*2490*3440
Working size(L*W*H)(mm)
11110*2490*13110
Â
Welded Cement Silos (Single Piece)
The cement silo (cement tank) has a cylindrical structure, and the bottom is supported by four round tube legs. The whole silo is in the form of steel structure and welded; the top is provided with a dust collector and a pressure safety valve.
Cement silo (cement tank) has the following parts: the silo body steel structure part, the ladder, guardrail, feeding tube, dust collector, pressure relief valve, high and low level meter, the discharge valve, etc
The horizontal feeder has large capacity, high volume utilization, convenient installation and adjustment, compact structure, light weight, easy operation and convenient transfer; small terrain restriction, easy for process layout.The main machine is mainly composed of double cone tank feeder, unloading port gas system and tank support.
