·Beijing trial non-operating car 6 years exemption policy

From September 1st, Beijing implemented the “Opinions on Strengthening and Improving Motor Vehicle Inspection Work” of the Ministry of Public Security and the State Administration of Quality Supervision, and tried to exempt the inspection policy for non-operating cars within 6 years. Eligible private cars registered after September 2010 can enjoy the exemption policy. This part of the vehicle only needs to apply for the inspection mark every two years to the vehicle management business window. It is understood that Beijing has opened 60 processing windows. It is convenient for the owner to handle it nearby. Yesterday, the person in charge of the city's traffic control department made a detailed interpretation of the new policy implementation measures in Beijing.

Apply for a vehicle qualification mark every two years

Since September 1, 2014, non-operating cars and non-operating mini-buses that have been registered for registration for less than 6 years are exempt from the on-line inspection policy. When the above-mentioned vehicles are inspected regularly every two years as stipulated in the “Regulations on the Implementation of the Road Traffic Safety Law”, the owner only needs to go to the police management office, the vehicle management office, the vehicle management station, the law enforcement station, etc. every 60 years. Apply for the inspection mark.

The city's motor vehicle inspection field will no longer handle this business, and vehicles that meet the conditions will not need to go to the inspection site to check the exhaust emissions.

Series Steel Structure Industrial Cooling Tower

Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.

Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,

gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.


Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.

Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.

The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.

Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.

Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.

Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com