Model NO.: LDSD
Pressure: Low Pressure
Condition: New
Usage: Industrial
Trademark: Hongji
Transport Package: Woode Case
Specification: SGS, CE
Origin: Liaoyang China
HS Code: 8421199090
Model NO.: LDSD
Pressure: Low Pressure
Condition: New
Usage: Industrial
Trademark: Hongji
Transport Package: Woode Case
Specification: SGS, CE
Origin: Liaoyang China
HS Code: 8421199090
In chemical industry, strict requirements are brought forward to the performance of separators or horizontal spiral separators. Strong acid or strong alkali, high temperature and strength wear are the greatest challenges to the machinery. Security is of the most importance. To meet this challenging requirements, Longda separator manufactures every machine by taking these market requirements into consideration. All machines meet the strictest quality requirements(for example requirements of DIN EN ISO9001 Standards)Customized products can be supplied to customers to satisfy specific usage and personalized demands.
Special materials can be adopted according to a given product, temperature and medium. The explosion-proof type separator in compliance with high requirements air tightness is very important in chemical industry, The customized centrifugeal separator with its so wide product range can guarantee machine usabiity and reduce maintenance cost.
Application:
Oil additives
Oil additives
Dye and paints
Phaosphoric acid
PVC
Agar agar
Cellulose and derivatives
Herbicides
Lates (synthetic)etc
Lyes
Viscose
Salts
Suspensions with metals oxides, hydroxides and catalysts, etc
| Model |
Capacity(L/H) |
Weight(Kg) |
Dimension(LxWxH) |
| LDSD200 |
15000-20000 |
2680 |
2106x1694x2217 |
| LDSD100 |
10000-13500 |
2200 |
1810x1500x1855 |
| LDSD60 |
3000-5500 |
1680 |
1772x1473x1855 |
| LDSD30 |
1800-3500 |
860 |
1500x1200x1500 |
| LDSD15 |
1500-2500 |
810 |
1500x1100x1500 |
| LDSD10 |
500-1500 |
550 |
950x950x1250 |
In chemical industry, strict requirements are brought forward to the performance of separators or horizontal spiral separators. Strong acid or strong alkali, high temperature and strength wear are the greatest challenges to the machinery. Security is of the most importance. To meet this challenging requirements, Longda separator manufactures every machine by taking these market requirements into consideration. All machines meet the strictest quality requirements(for example requirements of DIN EN ISO9001 Standards)Customized products can be supplied to customers to satisfy specific usage and personalized demands.
Special materials can be adopted according to a given product, temperature and medium. The explosion-proof type separator in compliance with high requirements air tightness is very important in chemical industry, The customized centrifugeal separator with its so wide product range can guarantee machine usabiity and reduce maintenance cost.
Application:
Oil additives
Oil additives
Dye and paints
Phaosphoric acid
PVC
Agar agar
Cellulose and derivatives
Herbicides
Lates (synthetic)etc
Lyes
Viscose
Salts
Suspensions with metals oxides, hydroxides and catalysts, etc
| Model |
Capacity(L/H) |
Weight(Kg) |
Dimension(LxWxH) |
| LDSD200 |
15000-20000 |
2680 |
2106x1694x2217 |
| LDSD100 |
10000-13500 |
2200 |
1810x1500x1855 |
| LDSD60 |
3000-5500 |
1680 |
1772x1473x1855 |
| LDSD30 |
1800-3500 |
860 |
1500x1200x1500 |
| LDSD15 |
1500-2500 |
810 |
1500x1100x1500 |
| LDSD10 |
500-1500 |
550 |
950x950x1250 |
Water/Wet type wire drawing machine
LT23-25/288 water tank wire drawing machine
(1) Main technical parameters:
1. Maximum incoming line strength: ≤ 1400Mpa;
2. Drawing passes: 23, 25;
3. Maximum incoming wire diameter: 1mm;
4. Minimum outlet diameter: 0.1-0.12mm;
5. Maximum drawing speed: 15m/s;
6. Average pass compression ratio: 14%;
7. Motor power: 15-18.5kw.
(2) Equipment composition for wet wire drawing machine
1. The frame is formed by welding section steel, and the tank body is formed by welding stainless steel plate;
2. The tower wheel is made of 45 steel, the working surface is sprayed with tungsten carbide powder (WC), the surface hardness is ＞ HRC60, the surface finish is 0.4Ra, and the service life is more than two years;
3. The machine coefficient is large in the front and small in the rear, which is conducive to improving production efficiency and continuous production;
4. Both the mold base and the mold base have angles, and the steel wire is always in a straight line during drawing, which is conducive to improving the quality and not easy to break the wire;
5. Tower wheel and mold are cooled by immersion in self circulating lubricating coolant;
6. The transmission mode is driven by synchronous belt to eliminate oil leakage and reduce noise;
7. The main bearings are made of NSK brand from Japan, and the motors are frequency conversion motors;
8. The finished product mold is installed in the mold base that can adjust the angle, which is conducive to the alignment of the finished product reel and the adjustment of the product ring diameter;
9. Box overturning force ≤ 200N;
10. All wire passing wheels and rollers are subject to quenching treatment, with surface hardness ＞ HRC50;
11. AC frequency conversion speed regulation is adopted, and the frequency converter adopts Siemens or Huichuan brand;
12. The electric control mode is PLC control, and the PLC is made of Mitsubishi or Siemens;
13. The touch screen is Taiwan made color touch screen, and low-voltage electrical components are all domestic well-known brands;
14. The machine is equipped with inching, front and rear linkage, start, stop and other functions. The human-machine interface of the main operating console has the functions of length, speed preset display, fault query, and equipment status display;
15. The electric cabinet is a standard cabinet produced by professional enterprises.
Water/Wet Type Wire Drawing Machine,Water Type Wire Drawing Machine,Wet Type Wire Drawing Machine,Water Tank Wire Drawbench
Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com