Tube Straightening and Cutting Machine
Hard-rail Horizontal Machine Tools The horizontal lathe is capable of performing operations such as turning internal and external cylindrical surfaces, conical surfaces, forming rotary surfaces and annular grooves, turning sections and various threads, drilling, reaming, tapping threads, sleeve threading and knurling. Although the automation level of an ordinary horizontal lathe is low with a relatively longer auxiliary time in the process; due to its wide range of processing capabilities and overall performance, this type of machine tool has become widely popularized within the machining industry. It is a quintessential representative of our machinery industry and an indispensable piece of equipment for any machining operation. High Quality Slant Bed CNC Lathe,High Quality Cnc Lathe Machined Service,Newly Woodworking CNC Router Ningbo Leyan Machinery Technology Co., Ltd , https://www.cncleyan.com
Tube Cutting Machine
Straightening & Cutting Machine
1.Model: 2-tube machine, 4-tube machine;
2.Production Progress: 6times / minute
3.Copper Tube Specification: Free Choice from O.D.4.76 ~ O.D.19.05mm
Purpose:
   Tube Cutting Machine is used to open, straighten and chipless
   cut the coil copper pipe into set-length straight pipes It
   is mainly applied in the areas of air-condition, water
   heater, airplane, automobile, etc.
Main Technical parameters of Straightening and Cutting Machine:
1.Straightening and Cutting Machine is consist of Main Body,Motor Driven Uncoiler and Collecting Stack.
2.Tubing specification:Out Diameter of Copper,thickness as customer's requirement length from:as required.
3.Driven by servo-motor,touch screen input for cut length,quality and so on.
4.Copper tube or aluminum tube should be dead soft.
Straightening and Cutting Machine Structure Features:
Structure:Feeding from coil stand,straighten by aligned rollers which located in vertical and horizontal planes respectively.Cut by outside blade and pull apart.All action of feeding,straightening,length cut,pull apart and reset will be automatically.
Straightening and Cutting Machine Feeding Device:2 tubes from Eye to sky payoff.
Straightening and Cutting Machine Straightening Device:Straightening by vertical add horizontal planes respectively which roundness of tube will be obtained.
Straightening and Cutting Machine Feeding Device:Driven by servo-motor,one meter per feeding,multi-feeding is needed when longer than one meters,desired length setting will be valid through touch screen input.
Straightening and Cutting Machine Cut Blade:outside round cutting and pull apart without burr and span,Min length of tubing is 60mm.
Â
Straightening and Cutting Machine Main Components:
a.Control system will be MITSUBISHI PLC & Servo-Motor,OMRON touch screen,hard guard system.
b.Pneumatic parts will be SMC products.
c.Hydraulic parts will be Yuken products Electric parts(Limit switch,Switch,Main switch,Connector,Relay and so on)will be high quality product with Schneider.
Tube Cutting Machine
Straightening & Cutting Machine
1.Model: 2-tube machine, 4-tube machine;
2.Production Progress: 6times / minute
3.Copper Tube Specification: Free Choice from O.D.4.76 ~ O.D.19.05mm
Purpose:
   Tube Cutting Machine is used to open, straighten and chipless
   cut the coil copper pipe into set-length straight pipes It
   is mainly applied in the areas of air-condition, water
   heater, airplane, automobile, etc.
Main Technical parameters of Straightening and Cutting Machine:
1.Straightening and Cutting Machine is consist of Main Body,Motor Driven Uncoiler and Collecting Stack.
2.Tubing specification:Out Diameter of Copper,thickness as customer's requirement length from:as required.
3.Driven by servo-motor,touch screen input for cut length,quality and so on.
4.Copper tube or aluminum tube should be dead soft.
Straightening and Cutting Machine Structure Features:
Structure:Feeding from coil stand,straighten by aligned rollers which located in vertical and horizontal planes respectively.Cut by outside blade and pull apart.All action of feeding,straightening,length cut,pull apart and reset will be automatically.
Straightening and Cutting Machine Feeding Device:2 tubes from Eye to sky payoff.
Straightening and Cutting Machine Straightening Device:Straightening by vertical add horizontal planes respectively which roundness of tube will be obtained.
Straightening and Cutting Machine Feeding Device:Driven by servo-motor,one meter per feeding,multi-feeding is needed when longer than one meters,desired length setting will be valid through touch screen input.
Straightening and Cutting Machine Cut Blade:outside round cutting and pull apart without burr and span,Min length of tubing is 60mm.
Â
Straightening and Cutting Machine Main Components:
a.Control system will be MITSUBISHI PLC & Servo-Motor,OMRON touch screen,hard guard system.
b.Pneumatic parts will be SMC products.
c.Hydraulic parts will be Yuken products Electric parts(Limit switch,Switch,Main switch,Connector,Relay and so on)will be high quality product with Schneider.