Differential pressure transmitters are widely used in petroleum, chemical, power, metallurgical and other industries. This product is mainly used to measure the differential pressure, pressure and negative pressure of liquid, gas and steam. It can also measure the liquid level of the opening or pressurized container. The throttling device can measure the flow of liquid, gas or steam and will be tested. The parameter conversion becomes a 4-20 mA DC signal output and is transmitted to a secondary meter or a regulating unit for detection or control.
    Differential pressure transmitter usage:
    1. The differential pressure transmitter must recalibrate the measurement range, zero drift, accuracy, and static pressure error before use.
    2. After the transmitter is installed, it is necessary to check the working pressure, working temperature, measurement range, and drift amount of various transmitters before driving. To see if it is consistent with the actual situation, if there is any discrepancy, you must find out the reason and correct it before you can drive.
    3. When starting and deactivating, the instrument should be protected from one-way static pressure. In order to avoid one-way pressure during use, each differential pressure transmitter should be provided with a three-valve assembly, usually installed above the differential pressure transmitter, in which valve 1 and valve 3 are high pressure and low pressure shut-off valves, respectively. Valve 2 is a balancing valve. The balance valve 2 is used to protect the differential pressure transmitter and facilitate zeroing when the meter is opened and stopped. When opening the differential pressure transmitter, open balance valve 2 first, and then open valves 1 and 3. After valve 1 and valve 3 are fully opened, close valve 2. When the differential pressure transmitter is deactivated, it is also necessary to open the balance valve 2 and then close the valve 1 and the valve 3 respectively. Turning on or off the differential pressure transmitter in the above order can prevent the differential pressure transmitter from bearing Overpressure to static pressure; for differential pressure transmitters with cold gel or spacer fluid, cold gel or spacer fluid can also be avoided.
    Huajiang Automation can provide you with professional differential pressure transmitter selection suggestions and reliable differential pressure transmitter products. Any questions can be caused, we will have professional technical staff to help you answer, hoping to bring you help !
Differential pressure transmitter usage
December 27 09:04:12, 2019
Double
stations Vacuum Forming Machine
Double stations vacuum forming
machine applications
Double stations vacuum forming
machine is adapt for PVC, PP, PET, PEGT, OPP, POF, PS,
ABS etc, it can transform plastic sheets into various plastic blisters. These
blisters are widely used in hardware, stationery, commodity, electronic
products, health products, disposable cups etc.
It`s also suitable for the blister
packaging in toys, hardware, food, electronic products, medicine, commodity and
so on.
Double Stations Vacuum Forming Machine Features
1. Double mould
plates design, the heat furnace can heat to the two mold plate respectively.
The working efficiency is nearly twice as fast as that of the single mould
plate machine
2. 25pcs ceramic infrared heating boards which can be controlled
separately, suit for different size or different thickness material.
3. 25pcs Solid state voltage regulators, control heating boards simple and
visualized.
4. Large-scale cooling fan which can cool the products quickly.
5. Water-spray cooling system which suit for thick material.(optional)
6. Manual and Semi-auto style.
7. Button or pedal control available, improve the efficiency.
Double
stations vacuum forming machine Parameters
Model
HX-61A
Power supply
AC380V 50/60HZ
Power
13.0KW
Max. forming size
560*610mm
Max. forming height
200mm
Speed
300~500moulds/H
Thickness of material
0.2~1.5mm
Machine size
2700*1200 *2000mm
N. weight
1200KG
Double Stations Vacuum Forming Machine
Double Stations Vacuum Forming Machine,Double Stations Vacuum Plastic Forming Machine,Double Stations Blister Vacuum Forming Machine,Double Stations PVC Forming Machine
ShenZhen Hengxing Machinery Factory , http://www.szchxjx.com