Model NO.: Bosj
Control System: PLC
Material of Roller: Gcr 15A
Operation Type: Auto
Advantage: Use Widely
HS Code: 8455212000, 845521200
Power: About 34
Drive Type: Gear Box
Production Speed: 6-8m/Min
Size of Production: Reference The Picture
Material: Mild Steel Galvanized Sheet
Trademark: BOSJ
Transport Package: Nude
Specification: 28X4X3.9
Origin: Jiangsu, China
Model NO.: Bosj
Control System: PLC
Material of Roller: Gcr 15A
Operation Type: Auto
Advantage: Use Widely
HS Code: 8455212000, 845521200
Power: About 34
Drive Type: Gear Box
Production Speed: 6-8m/Min
Size of Production: Reference The Picture
Material: Mild Steel Galvanized Sheet
Trademark: BOSJ
Transport Package: Nude
Specification: 28X4X3.9
Origin: Jiangsu, China
Â
Galvanized Fire Shutter Louver Blade Roll Forming Equipment1, Forming process
De-coiler- Servo feeding- Gap and cut off mould- Forming ---collection table
2, Flow diagram
3, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
4, Technical parameter of equipment main parts
1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
2, Feeding: Power 0.37kw
3, Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
NO. |
Project |
Unit |
parameters |
Remark |
1 |
Material |
type |
 |
Mild steel Galvanized sheet |
 |
| Strength of material sheet |
Map |
≥350 |
 |
| Thickness of material sheet |
mm |
0.8~1.5 |
 |
| 2 |
Size of production
 |
mm |
     Â
Reference the picture |
 |
| 3 |
Production speed |
m/min |
6~8 |
 |
| 4 |
Material of roller |
 |
GCr quenching treatment
 |
 |
| 5 |
Drive type |
 |
Gear box |
 |
| 6 |
Power |
kw |
About 34 |
 |
| 7 |
Electric control system |
 |
PLC variable frequency control |
 |
| 8 |
Dimensions(Length*width*height)
 |
m |
28X4X3.9 |
 |
Â
Galvanized Fire Shutter Louver Blade Roll Forming Equipment1, Forming process
De-coiler- Servo feeding- Gap and cut off mould- Forming ---collection table
2, Flow diagram
3, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
4, Technical parameter of equipment main parts
1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
2, Feeding: Power 0.37kw
3, Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
NO. |
Project |
Unit |
parameters |
Remark |
1 |
Material |
type |
 |
Mild steel Galvanized sheet |
 |
| Strength of material sheet |
Map |
≥350 |
 |
| Thickness of material sheet |
mm |
0.8~1.5 |
 |
| 2 |
Size of production
 |
mm |
     Â
Reference the picture |
 |
| 3 |
Production speed |
m/min |
6~8 |
 |
| 4 |
Material of roller |
 |
GCr quenching treatment
 |
 |
| 5 |
Drive type |
 |
Gear box |
 |
| 6 |
Power |
kw |
About 34 |
 |
| 7 |
Electric control system |
 |
PLC variable frequency control |
 |
| 8 |
Dimensions(Length*width*height)
 |
m |
28X4X3.9 |
 |
Drum Stamping Die
Drum Stamping Die,Tool For Washing Machine Drum Parts,washer drum stamping mould,,drum punching die for washing machine
Wuxi IDO Technology CO.,LTD , https://www.idotechina.com