How to solve the problems of cutting materials in the cutting process of band sawing machines
Thermostat & Humidistat Air Conditioner For Archives Thermostat & Humidistat Air Conditioner For Archives,Archives Air Conditioner,Archive Humidistat,Archive Thermostat Newfair Eco-Energy(Guangdong) Co.,Limited , https://www.newfairecoenergy.com
1. If everything is normal in the early sawing period, there is no problem with the saw blade, but the saw sawing caused by the replacement of the saw blade is the biggest possible problem is the saw blade, the general is mainly saw blade quality factors are larger, more about the saw blade The problem can be found in the Saw Blades section of the World Saw Site.
2. If you eliminate the saw blade, then the other factors should be considered in the sawing machine. If there is no problem with the previous saw blade, such as saw blade, etc., then this time it is necessary to focus on checking the relationship between the sawing machine and the saw blade. After all, every time the saw blade needs to be replaced, therefore, related to the saw blade, for example, the saw blade is not tightened sufficiently. To give a large amount of factors, you need to pay attention.
3, if the above problems are ruled out, then it is necessary to consider whether the sawing machine has reached the maintenance period. After all, the accessories of the sawing machine also have a long life. No one knows when it will cause problems.
Regarding the factors that do not correct the sawing machine, just check the following equipment accessories.
1. The distance between the guide blocks 2, the guide arm gap 3, and whether the saw frame is longitudinally vertical at 90 degrees.
Excluding the above related factors, you can solve the problem of skew when sawing the sawing material. Generally, consider the method from the saw blade first and eliminate the saw blade. Saw blade is best to solve the fault.