1. When the moisture content of the material is large, care should be taken to prevent clogging.

When crushing materials with large water content or excessive viscosity, it is easy to cause material adhesion or blockage of equipment. At this time, it is necessary to stop in time and deal with the cause of blockage, and it is not possible to directly carry out the antimony ore in the operation of the roller crusher. In order to avoid damage to the equipment, and even cause the tantalum ore medium to break inside the equipment, causing more serious production accidents.

2. Use lubricating oil to extend the service life of wearing parts.

When using the roller crusher in each shift, check the lubricating oil of the equipment to avoid the lack of lubricating oil and cause the wear of the double roller bearing and shorten the service life of the double roller.

3. Screening before crushing the material, adding a de- ironing device to the inlet.

During the production process, if unbreakable objects fall into the double roll and cannot pass through the roller crusher, the unbreakable material will be repeatedly turned over between the double rolls, which will easily cause damage to the double rolls, and even cause equipment to stop, shortening the double Roller life. Therefore, before use, a de-ironing device can be added to the feed port of the roller crusher to effectively extend the service life of the double roller.

4, regular maintenance, maintenance equipment

After the production work on the roller crusher, regular maintenance and overhaul of the equipment is required to maintain the continuous and stable production capacity of the equipment.

Epoxy Accelerator

Epoxy Accelerator,Epoxy Curing Accelerator,Epoxy Diluent For Coating,Epoxy Resin Promoter

Changzhou Dahua-Luckypower , https://www.lpsiliconeemulsion.com