Sprinklers are the common special vehicles in the city and have made important contributions to the city's environment. How should the sprinklers respond to the following failures? Below we introduce some specific methods.

1. When there is a leak in the cylinder head of the sprinkler truck , leakage and leakage occur.

At this time, we can use some special electric fuses according to the size of the loopholes, and then pry them into the leaks properly with a hammer so that we can eliminate oil leakage and water leakage.

2. When the fan belt breaks

At this time, the broken belt can be tied up with iron wire, or the car can be driven off using the method of opening and stopping.

3. When the tubing breaks

When a tubing breaks, we can connect it with a tubing of the same length as the tubing. However, if the connection does not work, the two ends are then tied tight with iron wire so that oil leakage can be prevented. 4. When the fuel tank is damaged

If the motor vehicle is in use and there is a case of oil leakage from the fuel tank, it should be cleaned up in a timely manner or coated with a viscous material such as bubble gum in the oil spill so that it can temporarily block, if further repairs, Then you can use epoxy resin adhesive repair, repair better.

5. When the inlet and outlet hoses break

When the breakage is not large, we can use some fabrics and other materials to tie the leaking places. However, if the breakage is serious, we should use iron pipes or bamboo pipes to remedy the situation. .

6. When the screw hole is slipped

The sprinkler will stop working when the screw hole is slipped, and it will cause oil leakage when it is serious. How should we solve this? We can use a hammer to flatten the slide bar and then fix it, but it should be noted that it cannot be dismantled many times. If the malfunction is serious, it should be repaired during the next maintenance.

7. When the tubing ruptures and leaks

When the tubing leaks, first remove the excess oil with a clean cloth or paper, then apply some soap on the cracked area, wrap it around the cracked area with a strong cloth or tape, and finally tie it tightly with wire. Finally, apply some soap to prevent oil leakage.

Sodium Lauryl Ether Sulfate

Sodium Lauryl Ether Sulfate (SLES), an accepted contraction of Sodium Laureth Sulfate (SLES), also called sodium alkylethersulfate, is an anionic detergent and surfactant found in many personal care products (soaps, shampoos, toothpaste, etc.) and for industrial uses. SLES is an inexpensive and very effective foaming agent.SLES, Sodium Lauryl Ether Sulphate (SLS), ammonium lauryl sulfate (ALS), and sodium pareth sulfate are surfactants that are used in many cosmetic products for their cleaning and emulsifying properties. It is derived from palm kernel oil or coconut oil. In herbicides, it is used as a surfactant to improve absorption of the herbicidal chemicals and reduces time the product takes to be rainfast Water Treatment, when enough of the herbicidal agent will be absorbed.

Sodium Lauryl Ether Sulfate Sles chemical formula is CH3(CH2)11(OCH2CH2)nOSO3Na. Sometimes the number represented by n is specified in the name, for example laureth-2 sulfate. The product is Sodium Hexametaphosphate heterogeneous in the number of ethoxyl groups, where n is the mean. Laureth-3 sulfate is Titanium Dioxide common in commercial products.

Sodium Lauryl Ether Sulfate,Sodium Laureth Sulfate,Sodium Lauryl Ether Sulphate,Sodium Lauryl Ether Sulfate Sles

HENAN LIHAO CHEM PLANT LIMITED , https://www.lihaoche.com