The problem of the constant temperature and humidity box in the handling process
Daily Chemical Bag Making Machine Daily Chemical Bag Making Machine,Cosmetic Plastic Bag Making Machine,Plastic Bags Machine Making Automatic,Self Sealing Bag Making Machine Wuxi Shengkun Machinery Co.,Ltd , https://www.skpouchmachine.com
1. When a lot of people are carrying, the cabinet will be tilted, but also feel that it does not matter much, but our constant temperature and humidity box must not be transported in an inclined manner. Since the test chamber is cooled by a compressor, it is in the process of handling. Must not tilt in the middle, then if there are special circumstances have to tilt, then the tilt angle can not exceed 15 degrees, to avoid leakage of freon can not be cooled.
2. In the process of handling, the water tank nozzle is active. If no measures are taken, it will slide out and hurt the personnel.
3. During transportation, many people will ignore the faucet on the back of the cabinet. The power cable is confiscated. During the process, there may be water flowing out to wet the ground and the power cord will invade the water. .
4. In the handling process, there will inevitably be impact, scratching, bumping, which will affect the appearance of the device, so we should pay attention to prevention and good measures when handling.
5. If the cabinet is too large, it is not recommended to carry it by hand. Because the weight and volume are too large, it may cause damages to personnel and machines and major safety hazards. At this time, cranes can be used, and the placement and replacement of equipment can be used.
6. The correct professional technicians should guide the move when carrying.
7. In the process of handling, the hinges of the main door should be taken care of to prevent the door from sagging or the center of gravity from becoming unstable due to loosening.