ISO21287 Standard Advu Series Pneumatic Air Cylinder

January 05 08:05:52, 2019

Model NO.: ADVU
Double-Acting Cylinder Type: Common Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Gas-Liquid Pressurized Cylinder
Trademark: VPC Pneumatic
Origin: China
Model NO.: ADVU
Double-Acting Cylinder Type: Common Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Gas-Liquid Pressurized Cylinder
Trademark: VPC Pneumatic
Origin: China
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder

  1.Smart appearance,save the space

  2.Proximity transducer is flush mounted inside sensor groove,prevent sensor from mechanical damage

  3.Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation

  4.Good replacement for the FESTO same type.

Note:ADVU series Cylinder With 100mm bore size is under designing,not available this time.
ISO21287 standard ADVU series Pneumatic Air Cylinder
Features:
1) Bore size: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, and 100mm
2) Acting type:  double acting or single acting
3) Material: aluminum
4) Seals: NBR
5) Rod end thread type: internal thread, external thread or NO thread
6) Working pressure:0.1~0.9MPa
7) Working temperature: 0~70C
8) Port connection size: M5, G1/8", G1/4", G3/8"
Bore(mm) 16 20 25 32 40 50 63 80 100
Action Double acting, single rod/double rod
Fluid Filtered compressed air
Ensured Pressure Resistance 1.5MPa
Operating
pressure range		 ADVU - -P-A 0.12~1.0MPa 0.1~1.0MPa 0.08~1.0MPa 0.06~1.0MPa
ADVU - -P-A-S2 0.13~1.0MPa 0.12~1.0MPa 0.1~1.0MPa 0.8~1.0MPa
Ambient and fluid temperature -20~80 (No freezing)
Port size M5 G1/8" G1/4"
Piston rod thread Female thread M4 M5 M6 M8 M10 M12
Male thread M8 M10×1.25 M12×1.25 M16×1.5 M20×1.5
Cushion Rubber bumper
 

Other Compact/Thin Cylinders are also available for you:

SDA series Thin Cylinder

CQ2 series Compact Cylinder

Our company also can provide other pneumatic cylinders as below,

1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISO 6432)

2.Standard cylinder:SC/SU,MB,CA1

3.Mini cylinder:MA,MAL,CJ2,CM2,CJP

4.Double-shaft cylinder:TN,CXS

5.Free installation cylinder:CU

6.Slide bearing cylinder:STM

7.Three-shaft cylinder:MGP

8.Stopper cylinder:RSQ

9.Clamp cylinder:XCK

10.Rotary cylinder:MSQ

11.Rodless cylinder:CY1

12.Air gripper:XHZ2/XHC2,XHL2,XHT2

More information and details,you can contact us and visit our website.

If you have the nonstandard products want to design,don't hesitate to contact us.
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
 

 

ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder

  1.Smart appearance,save the space

  2.Proximity transducer is flush mounted inside sensor groove,prevent sensor from mechanical damage

  3.Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation

  4.Good replacement for the FESTO same type.

Note:ADVU series Cylinder With 100mm bore size is under designing,not available this time.
ISO21287 standard ADVU series Pneumatic Air Cylinder
Features:
1) Bore size: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, and 100mm
2) Acting type:  double acting or single acting
3) Material: aluminum
4) Seals: NBR
5) Rod end thread type: internal thread, external thread or NO thread
6) Working pressure:0.1~0.9MPa
7) Working temperature: 0~70C
8) Port connection size: M5, G1/8", G1/4", G3/8"
Bore(mm) 16 20 25 32 40 50 63 80 100
Action Double acting, single rod/double rod
Fluid Filtered compressed air
Ensured Pressure Resistance 1.5MPa
Operating
pressure range		 ADVU - -P-A 0.12~1.0MPa 0.1~1.0MPa 0.08~1.0MPa 0.06~1.0MPa
ADVU - -P-A-S2 0.13~1.0MPa 0.12~1.0MPa 0.1~1.0MPa 0.8~1.0MPa
Ambient and fluid temperature -20~80 (No freezing)
Port size M5 G1/8" G1/4"
Piston rod thread Female thread M4 M5 M6 M8 M10 M12
Male thread M8 M10×1.25 M12×1.25 M16×1.5 M20×1.5
Cushion Rubber bumper
 

Other Compact/Thin Cylinders are also available for you:

SDA series Thin Cylinder

CQ2 series Compact Cylinder

Our company also can provide other pneumatic cylinders as below,

1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISO 6432)

2.Standard cylinder:SC/SU,MB,CA1

3.Mini cylinder:MA,MAL,CJ2,CM2,CJP

4.Double-shaft cylinder:TN,CXS

5.Free installation cylinder:CU

6.Slide bearing cylinder:STM

7.Three-shaft cylinder:MGP

8.Stopper cylinder:RSQ

9.Clamp cylinder:XCK

10.Rotary cylinder:MSQ

11.Rodless cylinder:CY1

12.Air gripper:XHZ2/XHC2,XHL2,XHT2

More information and details,you can contact us and visit our website.

If you have the nonstandard products want to design,don't hesitate to contact us.
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
 

 

External/ internal Tail Lift

We design Truck Tail Lifts to install on any type of truck. The capacity of Akodi power tail lift ranges from 1000kg to 3000kg. With premium hydraulic system, the Electric Tail Lift Board is stable without oil leakage. We can make two different styles external lift or Internal Liftgate.

  • Hydraulic system fully automatic operation, suitable for installation in all types of truck
  • Using vehicle power supply, eco-friendly, improve the tailgate life
  • Oil cylinder performance is stable without oil leakage
  • Convenient and efficient four buttons electric control panel
  • Fully closed pattern steel panel can be installed inside or outside of the gate; more precise and security as a whole

 


Measurement/ Model

DC-WB10

DC-WB15

DC-WB20

DC-WB30

Size(mm)

1500×1800

1650×2050

1800×2150

1800×2400

1650×1800

1800×2250

1800×2300

1650×2000

1800×2350

1800×2400

Max. lifting capacity(kg)

1000

1500

2000

3000

Net Weight(kg)

350-380

420-450

450-480

550-580

Panel working angle

5° - 9°

Generator

Voltage

12V / 24V

Power(kw)

2

2

3

3

The minimum length of the tail L(mm)

750

750/800/850

900/1000

1000

Applicable car height H(mm)

650-1550

1200-1550

Average lifting speed

50-80mm/sec

Oil

Anti-wear hydraulic oil

Tail Lift

internal tail lift


Tail Lift

Truck Tail Lifts,Tail Lift,Electric Tail Lift Board,Internal Liftgate

Akodi Intelligent Logistics Technology Co., LTD , http://www.akodiforklift.com